MPC564MZP66 Freescale Semiconductor, MPC564MZP66 Datasheet - Page 979

• Manufacturer Part Number: MPC564MZP66
• Description: IC MCU 512K FLASH 66MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP66

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Table 24-8
24.6.1.5
The MC register is used to select different modes of the READI module.
register bits.
Freescale Semiconductor
1
RCPU
Bits
The DOR and DME fields in the DC register can only be modified when system reset is asserted, or reset (to default
state) when the READI module is reset by the assertion of RSTI.
3:5
6:7
0
1
2
describes the DC register fields with the mode configurations for RCPU development access.
Nexus
Mode Control Register (MC)
Bits
DOR
4:2
1:0
7
6
5
0
1
x
Name
DOR
DME
DPA
TM
EC
DME
1
1
0
1
1
Table 24-8. RCPU Development Access Modes
READI Debug Mode Entry Out-of-reset Field can be configured to enable or disable
debug mode entry out of reset.
0 Debug Mode Not Entered Out-of-Reset
1 Debug Mode Entered Out-of-Reset
READI Debug Mode Enable Field can be configured to enable or disable debug
mode.
0 Debug Mode Disabled
1 Debug Mode Enabled
Reserved
READI Trace Mode Field can be configured to enable BTM, DTM, and OTM. Any or
all types of trace may be enabled.
000 No Trace
1xx BTM Branch Trace Messaging Enabled
x1x DTM Data Trace Messaging Enabled
xx1 OTM Ownership Trace Messaging Enabled
READI EVTI Control Field can be configured for synchronization and breakpoint
generation. If the EC is equal to 0b00, asserting EVTI will cause the next program and
data trace message to be a synchronization message (providing program and data
trace are enabled). If the EC field is equal to 0b01, a breakpoint will be generated. If
the field is configured to one of the reserved states, its action reverts to that of the
default state.
NOTE: The EVTI signal is level sensitive when EC is configured for breakpoint
generation. This implies that as long as EVTI assertion is continued (with EC set to
0b01), the READI module will continue requesting a breakpoint. The user must detect
breakpoint generation and negate the EVTI signal appropriately.
00 EVTI for program and data trace synchronization
01 EVTI for breakpoint generation
1x No Action
MPC561/MPC563 Reference Manual, Rev. 1.2
Non-debug mode access of RCPU development through READI.
Debug mode is enabled through READI (RCPU is still in normal mode, out
of reset)
Debug mode is enabled through READI and entered out-of-reset. Debug
mode entry causes RCPU to halt.
Table 24-7. DC Bit Descriptions
RCPU Development Access through READI
Description
Table 24-7
shows the location of
READI Module
24-11