C8051F320 Silicon Laboratories Inc, C8051F320 Datasheet - Page 114

• Manufacturer Part Number: C8051F320
• Description: IC 8051 MCU 16K FLASH 32LQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F32xr

Specifications of C8051F320

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 25
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 17x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

C8051F320/1
12.2. Accessing USB FIFO Space
The upper 1k of XRAM functions as USB FIFO space. Figure 12.2 shows an expanded view of the FIFO space and
user XRAM. FIFO space is accessed via USB FIFO registers; see
for more information on accessing these FIFOs. The MOVX instruction should not be used to load or modify USB
data in the FIFO space.
Unused areas of the FIFO space may be used as general purpose XRAM, accessible as described in
FIFO block operates on the USB clock domain; thus the USB clock must be active when accessing FIFO space. Note
that the number of SYSCLK cycles required by the MOVX instruction is increased when accessing USB FIFO space.
Important Note: The USB clock must be active when accessing FIFO space.
114
User XRAM Space
(System Clock Domain)
0x03FF
Figure 12.2. XRAM Memory Map Expanded View
0x0000
(1024 bytes)
User XRAM
Rev. 1.1
0x07C0
0x07BF
0x07FF
0x0740
0x073F
0x0640
0x063F
0x0440
0x043F
0x0400
Section “15.5. FIFO Management” on page 151
(128 bytes)
(256 bytes)
(512 bytes)
Endpoint0
Endpoint1
Endpoint2
Endpoint3
(64 bytes)
(64 bytes)
Free
USB FIFO Space
(USB Clock Domain)
Section
12.1. The