MC68HC711E9CFU2 Freescale Semiconductor, MC68HC711E9CFU2 Datasheet - Page 235

no-image

MC68HC711E9CFU2

Manufacturer Part Number
MC68HC711E9CFU2
Description
IC MCU 12K OTP 2MHZ 64-QFP
Manufacturer
Freescale Semiconductor
Series
HC11r
Datasheets

Specifications of MC68HC711E9CFU2

Core Processor
HC11
Core Size
8-Bit
Speed
2MHz
Connectivity
SCI, SPI
Peripherals
POR, WDT
Number Of I /o
38
Program Memory Size
12KB (12K x 8)
Program Memory Type
OTP
Eeprom Size
512 x 8
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Data Converters
A/D 8x8b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-QFP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Step 6
Erase the CONFIG to allow programming of NOSEC bit (bit 3). It is also recommended to program the
EEPROM at this point before programming the CONFIG register. Refer to the engineering bulletin
Programming MC68HC811E2 Devices with PCbug11 and the M68HC711E9PGMR, Freescale document
number EB184.
At the PCbug11command prompt, type: EEPROM ERASE BULK 103F
Step 7
You are now ready to enable the security feature on the MCHC811E2.
At the PCbug11 command prompt, type: MS 103F 05
The value $05 assumes the EEPROM is to be mapped from $0800 to $0FFF.
Step 8
After the programming operation is complete, verifying the CONFIG on the MCHC811E2 is not possible
because in bootstrap mode the default value is always forced.
Step 9
The part is now in secure mode and whatever code you loaded into EEPROM will be erased if you tried
to bring the microcontroller up in either expanded mode or bootstrap mode. The microcontroller will work
properly in the secure mode only in single chip mode.
Freescale Semiconductor
Enabling the Security Feature on M68HC811E2 Devices with PCbug11 on the M68HC711E9PGMR, Rev. 0.1
If the part is placed in bootstrap mode or expanded mode, the code in
EEPROM and RAM will be erased the microcontroller can be reused.
NOTE
To Execute the Program
235

Related parts for MC68HC711E9CFU2