TS952IPT STMicroelectronics, TS952IPT Datasheet - Page 2

• Manufacturer Part Number: TS952IPT
• Description: IC OP AMP R-R DUAL LO PWR 8TSSOP
• Manufacturer: STMicroelectronics

Specifications of TS952IPT

• Amplifier Type: General Purpose
• Number Of Circuits: 2
• Output Type: Rail-to-Rail
• Slew Rate: 1 V/µs
• Gain Bandwidth Product: 3MHz
• Current - Input Bias: 35nA
• Voltage - Input Offset: 6000µV
• Current - Supply: 950µA
• Current - Output / Channel: 10mA
• Voltage - Supply, Single/dual (±): 2.7 V ~ 12 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-TSSOP
• Number Of Channels: 2
• Common Mode Rejection Ratio (min): 50 dB
• Input Offset Voltage: 6 mV
• Input Bias Current (max): 100 nA
• Operating Supply Voltage: 3 V, 5, V, 9 V
• Supply Current: 2.8 mA
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Shutdown: No
• Supply Voltage (max): 12 V
• Supply Voltage (min): 2.7 V
• Technology: BiCMOS
• Voltage Gain Db: 86 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-6434-2; TS952IPT

Absolute maximum ratings and operating conditions
1
2/18
Absolute maximum ratings and operating conditions
Table 1.
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. Do not exceed 14 V.
4. Short-circuits can cause excessive heating and destructive dissipation. R
5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
7. Charged device model: all pins and the package are charged together to the specified voltage and then
Symbol
If V
resistor must be added to limit input current.
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
discharged directly to the ground through only one pin. This is done for all pins.
R
ESD
R
V
T
V
V
T
CC
thja
thjc
stg
id
id
in
j
> ±1 V, the maximum input current must not exceed ±1 mA. In this case (V
Absolute maximum ratings
Supply voltage
Differential input voltage
Input voltage
Storage temperature range
Maximum junction temperature
Thermal resistance junction to ambient
Thermal resistance junction to case
HBM: human body model
MM: machine model
CDM: charged device model
Latch-up immunity
Lead temperature (soldering, 10sec)
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
TS951
TS952
TS954
TS951
TS952
TS954
(3)
(1)
Parameter
Doc ID 5561 Rev 8
(6)
(2)
(5)
(7)
(4)
(4)
V
DD
-0.3 to V
-65 to +150
th
Value
are typical values.
150
250
125
103
120
100
100
200
260
1.5
1.5
±1
14
81
40
31
37
32
1
2
3
1
id
CC
> ±1 V), an input series
TS951, TS952, TS954
+0.3
°C/W
°C/W
Unit
mA
kV
kV
°C
°C
V
V
V
V