ERJ-XGNJ105Y Panasonic - ECG, ERJ-XGNJ105Y Datasheet - Page 6

RESISTOR 1.0M 1/32W 5% 01005

ERJ-XGNJ105Y

Manufacturer Part Number
ERJ-XGNJ105Y
Description
RESISTOR 1.0M 1/32W 5% 01005
Manufacturer
Panasonic - ECG
Series
ERJr
Datasheet

Specifications of ERJ-XGNJ105Y

Resistance (ohms)
1M
Power (watts)
0.03W, 1/32W
Composition
Thick Film
Temperature Coefficient
±200ppm/°C
Tolerance
±5%
Size / Dimension
0.016" L x 0.008" W (0.40mm x 0.20mm)
Height
0.005" (0.13mm)
Lead Style
Surface Mount (SMD - SMT)
Package / Case
01005 (0402 Metric)
Resistance In Ohms
1.00M
Case
01005 (0402 metric)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Other names
ERJ-XGNJ105Y
ERJXGNJ105Y
P1.0MAWTR
Q3612055B
Subject
Part No.
7. Machinery characteristic
Chip Resistor
Bending
strength
Solderability
Resistance to
soldering heat
Resistance to
vibration
(Low frequency)
Resistance to
solvent
Item
No mechanical damage.
∆R :
+/-(1%+0.05 ohm)
Termination should be
covered uniformly with solder
(Min. 95% coverage)
∆R :
+/-(1%+0.05 ohm)
∆R :
+/-(1%+0.05 ohm)
Without distinct
deformation in appearance
∆R :
+/-(0.5% +0.05 ohm)
Specification
PRODUCT SPECIFICATION FOR IMFORMATION
Panasonic Electronic Devices Co., Ltd.
ERJXGN
Substrate : Glass epoxy (t=1.0 mm)
Span : 90mm
Bending distance : 3mm (10 seconds)
<Test pattern>
Resistors shall be dipped in the melted solder
bath at 235 deg.C +/- 5 deg.C for 2 seconds
+/- 0.5 second. Flux shall be removed from
the surface of termination with clean organic
solvent.
Resistors shall be dipped in the melted solder
bath at 270 deg.C +/- 3 deg.C for 10 seconds
+/- 1 second.
Resistors shall be subjected to a single
vibration having as double amplitude of 1.5
mm in 3 directions perpendicular one another
for 2 hours each. (6 hours in total)
The vibration frequency shall be varied
uniformly from 10 Hz to 55 Hz, and return
to 10 Hz traversing for 1 min.
Solvent solution : Isopropyl alcohol
(1) Dipping 10 +/- 1 hours, dry in room
(2) Ultrasonic wave washing : 5 +/- 1 min.
condition for 30 +/- 10 minutes.
Dry in room condition for 30 +/-10 minutes.
Test Method (JIS-C5201-1)
0.2 0.2 0.2
(0.3W/cm
100
0.2
2
,28kHz)
Spec. No.
151-SRJ-EX07A
(mm)
11
-
5

Related parts for ERJ-XGNJ105Y