S14K150E2K1 EPCOS Inc, S14K150E2K1 Datasheet - Page 14

• Manufacturer Part Number: S14K150E2K1
• Description: VARISTOR 150V RMS 14MM RADIAL
• Manufacturer: EPCOS Inc
• Series: AdvanceD-MPr

Specifications of S14K150E2K1

• Varistor Voltage: 240V
• Current-surge: 6kA
• Number Of Circuits: 1
• Maximum Ac Volts: 150VAC
• Maximum Dc Volts: 200VDC
• Energy: 70J
• Package / Case: Disc 14mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 495-4286; B72214P2151K101

Soldering (where applicable)
1.
2.
3.
4.
Mounting
1.
2.
Operation
1.
2.
3.
PPD PD VAR PD
Please read Cautions and warnings and
Important notes at the end of this document.
Leaded varistors
AdvanceD-MP series
Use rosin-type flux or non-activated flux.
Insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended.
Complete removal of flux is recommended.
Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic
that will degrade the component’s electrical characteristics.
Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this
reason the SIOVs should be physically shielded from adjacent components.
Use SIOVs only within the specified temperature operating range
Use SIOVs only within the specified voltage and current ranges.
Environmental conditions must not harm the SIOVs. Use SIOVs only in normal atmospheric con-
ditions. Avoid use in the presence of deoxidizing gases (chlorine gas, hydrogen sulfide gas,
ammonia gas, sulfuric acid gas, etc), corrosive agents, humid or salty conditions, Avoid contact
with any liquids and solvents.
Page 14 of 15
SIOV-S14K***E2K1
B72214P2**1K101
2010-02-02