CY3653 Cypress Semiconductor Corp, CY3653 Datasheet - Page 5

• Manufacturer Part Number: CY3653
• Description: KIT DEVELOPMENT FOR PROC
• Manufacturer: Cypress Semiconductor Corp
• Series: WirelessUSB™r
• Type: WirelessUSBr

Specifications of CY3653

• Silicon Manufacturer: Cypress
• Application Sub Type: Wireless USB PRoC
• Kit Application Type: Communication & Networking
• Features: Enhanced Productivity Through A Simple Wireless System Solution
• Silicon Family Name: PRoC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: CYWUSB6953
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 428-1772

5.
The Protocol Slave Tutorial shows the simplicity of creating a slave device, which utilizes the
standard protocol using the WirelessUSB LS user module (See WirelessUSB LS 2-way HID
Systems for more information on the standard protocol). Initially, it goes through an automatic
bind process with a master device and is connected. When the button (S1) is pushed, byte
0x55 is transmitted to the master. If the button is not being pressed, then it polls the master
device for a valid ACK_DATA packet every 10 iterations through the loop by sending a null
packet. If a valid ACK_DATA packet is received from the master then app_unload_packet() is
called, which sets either LED1 or LED4. To run the Protocol Slave Tutorial follow the steps
below:
Steps:
Results:
WirelessUSB PRoC™ Development Kit Tutorial
1. Program the first PRoC Module on one of the Eval1 boards by using
2. Program the second board with the Protocol Master Tutorial hex file.
3. Push the button (S1) on either board.
The results are the same as the Radio Tutorial. An LED on the master board will light up.
Every time the button is pushed, the master board will switch between LED1 and LED4, if it
is wired the same as in the assembly instructions from the WirelessUSB PRoC DVK Quick
Start Guide. See the result figures in the Radio Tutorial.
PSoC and PRoC are trademarks of Cypress Semiconductor
Protocol Slave Tutorial
Protocol_Slave_Tutorial.hex file located at \Firmware\Binaries\ by following the
“Programming” instructions on page 1.
Page 5 of 5