X4-A11-E-A Digi International, X4-A11-E-A Datasheet - Page 160
X4-A11-E-A
Manufacturer Part Number
X4-A11-E-A
Description
CONNECTPORT X4 XBEE 802.15.4-ETH
Manufacturer
Digi International
Series
ConnectPort™ X4r
Specifications of X4-A11-E-A
Function
Transceiver, Xbee, Gateway
Modulation Or Protocol
802.15.4 Zigbee
Frequency
2.4GHz
Interface
1 USB, 1 RS-232, 1 RJ-45
Sensitivity
-93dBm
Power - Output
15dBm
Data Rate - Maximum
54Mbps
Voltage - Supply
6 V ~ 30 V
Interface Type
RS-232, Ethernet, SMA
Security
NAT, DES, 3DES, 256 bit AES
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Applications
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
NS9360
Other names
602-1108
- Current page: 160 of 254
- Download datasheet (3Mb)
SNMP Configuration settings:
Enable Simple Network Management Protocol (SNMP): This checkbox enables or
disables use of SNMP.
–
–
Enable Simple Network Management Protocol (SNMP) traps: Enables or disables
the generation of SNMP traps.
–
–
At the bottom of the page are checkboxes for the SNMP traps that can be used:
–
–
–
–
default is public.
default is private.
The Public community and Private community fields specify passwords required to
get or set SNMP-managed objects. Changing public and private community names from
their defaults is recommended to prevent unauthorized access to the device.
Public community: The password required to get SNMP-managed objects. The
Private community: The password required to set SNMP-managed objects. The
Allow SNMP clients to set device settings through SNMP: This checkbox enables or
disables the capability for users to issue SNMP “set” commands uses use of SNMP
read-only for the Digi device.
Trap Destinations:
Primary/Secondary: The IP address of the system to which the SNMP agent should
send traps. To enable any of the traps, a non-zero value must be specified. The primary
destination is required. The secondary destination is optional. For Digi devices that
support alarms, this field is required in order for alarms to be sent in the form of SNMP
traps. See "Alarms" on page 151.
Generate authentication failure traps: The SNMP agent will send SNMP
authentication traps when there are authentication failures.
Generate login traps: The SNMP agent will send SNMP login traps on login attempts.
Generate cold start traps: The SNMP agent will send traps on cold starts of the Digi
device.
Generate link up traps: The SNMP agent will send link up traps when network
connections are established.
C o n f i g u r e D i g i d e v i c e s
1 6 0
Related parts for X4-A11-E-A
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
PORT XBEE 802.15.4 - WIFI802.11G
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
PORT XBEE 802.15.4 - 2G GPRS
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
PORT X4 ZIGBEE TO ETHERNET
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
PORT X4 ZIGBEE TO WIFI
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
CONNECTPORT X4 2.4GHZ
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules CnnctPort X4 Rt Gtwy ZigBee S2C High Pwr
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
Zigbee / 802.15.4 Modules ConnectPort X4 Gtwy DigiMesh 900MHz
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
PORT XBEE ZNET 2.5 TO ETHERNET
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
XBEE ZNET 2.5 - WI-FI 802.11G
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
XBEE ZNET 2.5-ETH/CELL 2G GPRS
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules CnnctPort X4 IA Gtwy ZigBee S2C High Pwr
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules CnnctPort X4 Rt Gtwy ZigBee S2C High Pwr
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
IC ARM MICROPROCESSOR 177BGA
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
DIGI CONNECT 4MB FLASH 8MB RAM
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
ME 8MB SDRAM 2MB FLASH SINGLE
Manufacturer:
Digi International
Datasheet: