X4-A11-W-A Digi International, X4-A11-W-A Datasheet - Page 124

• Manufacturer Part Number: X4-A11-W-A
• Description: PORT XBEE 802.15.4 - WIFI802.11G
• Manufacturer: Digi International
• Series: ConnectPort™ X4r

Specifications of X4-A11-W-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: 802.15.4 Zigbee
• Frequency: 2.4GHz
• Interface: 1 USB, 1 RS-232, 1 RJ-45
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 6 V ~ 30 V
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, SMA
• Security: NAT, DES, 3DES, 256 bit AES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: NS9360
• Other names: 602-1109

Sender Control List (SCL) Settings
The Sender Control List (SCL) permits the user to select the addresses (or phone numbers) from
which SMS messages will be accepted. This is in effect a “Caller ID” capability in which message
senders are screened by the Digi device and either processed or discarded according to the
configured SCL rules.
Following are descriptions of the SCL-related settings for the SMS feature.


For each SCL rule, the following options may be configured:



Enable SMS Sender Control List: Enable the Sender Control List capabilities on this
Digi device. When this option is enabled, the remaining SCL-specific SMS options may
be configured. This option is disabled (off) by default.
Send NAK reply via SMS if received message is rejected by SCL: When a message is
received via SMS, SCL is enabled, and the sender is not permitted by the SCL rules,
send a negative acknowledgement (NAK) message via SMS to the originator of the
command message, indicating that the message has been rejected due to the configured
SCL rules. This option is disabled (off) by default.
Enable: The rule is enabled for use by SMS. Rules may be enabled and disabled
without removing them altogether from the SCL. Disabled rules are ignored when
examining received messages.
Sender Address (Phone Number): The address (phone number) of the sender for
which this rule applies. If the sender's address matches this configured address, the SMS
message is accepted for further processing. If the sender's address does not match any of
the enabled SCL rule addresses, it is rejected and no further processing is performed. To
remove the address, simply clear the address field on the settings page.
Match Type: The type of address match test that is to be performed for this rule. There
are four supported match types:
–
–
–
–
Exact: The sender's address must match exactly the address configured for this rule.
Right: The sender's address must match the address configured for this rule when
comparing the righmost characters to the shorter of the two strings (sender address, rule
address). For example, “5551212” matches “13125551212” since the rightmost
characters match to the length of the shorter string, “5551212”. This is the default match
type.
Left: The sender's address must match the address configured for this rule when
comparing the leftmost characters to the shorter of the two strings (sender address, rule
address). For example, “1312555” matches “13125551212” since the leftmost
characters match to the length of the shorter string, “1312555”.
Partial: The sender's address must match the address configured for this rule when
comparing the consecutive characters to the shorter of the two strings (sender address,
rule address).For example, “312555” matches “13125551212” since the shorter string
“312555” is a substring of the longer string “13125551212”.
C o n f i g u r e D i g i d e v i c e s
1 2 4