X4-A11-W-A Digi International, X4-A11-W-A Datasheet - Page 167

• Manufacturer Part Number: X4-A11-W-A
• Description: PORT XBEE 802.15.4 - WIFI802.11G
• Manufacturer: Digi International
• Series: ConnectPort™ X4r

Specifications of X4-A11-W-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: 802.15.4 Zigbee
• Frequency: 2.4GHz
• Interface: 1 USB, 1 RS-232, 1 RJ-45
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 6 V ~ 30 V
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, SMA
• Security: NAT, DES, 3DES, 256 bit AES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: NS9360
• Other names: 602-1109

Disable password authentication
Password authentication can be disabled as needed.
In the web interface:
1
2
3
From the command line:
Issue a newpass command with a zero-length password.
Change the password for administrative user
To increase security, change the password for the administrative user from its default. By default,
the administrative username is root.
Note
In Digi devices with a single-user model, changing the root password also changes the password
for Advanced Digi Discovery Protocol (ADDP). In Digi devices with the multi-user model,
changing the root password has no effect on ADDP. To change the ADDP password, enter
newpass name=addp from the command line.
In the web interface:
1
2
3
From the command line:
Issue the newpass command.
On the Main menu, click Security.
On the Security Configuration page, check the Enable password authentication check
box.
Click Apply.
On the Main menu, click Security.
On the Security Configuration page, enter the new password in the New Password and
Confirm Password edit boxes. The password can be from 4 through 16 characters long and
is case-sensitive. Click Apply.
A logoff is forced immediately. Log in to the web interface using the new values.
Record the new password. If the changed password is lost, the Digi device must be
reset to the default firmware settings.
C o n f i g u r e D i g i d e v i c e s
1 6 7