X4-A11-W-A Digi International, X4-A11-W-A Datasheet - Page 184

no-image

X4-A11-W-A

Manufacturer Part Number
X4-A11-W-A
Description
PORT XBEE 802.15.4 - WIFI802.11G
Manufacturer
Digi International
Series
ConnectPort™ X4r
Datasheets

Specifications of X4-A11-W-A

Function
Transceiver, Xbee, Gateway
Modulation Or Protocol
802.15.4 Zigbee
Frequency
2.4GHz
Interface
1 USB, 1 RS-232, 1 RJ-45
Sensitivity
-93dBm
Power - Output
15dBm
Data Rate - Maximum
54Mbps
Voltage - Supply
6 V ~ 30 V
Wireless Frequency
2.4 GHz
Interface Type
RS-232, Ethernet, SMA
Security
NAT, DES, 3DES, 256 bit AES
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Applications
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
NS9360
Other names
602-1109
Display system information
Monitoring capabilities in the web interface
Several device monitoring and connection-management capabilities are available in the web
interface including system information and statistics, and connection management information.
The System Information pages display general system information, serial port information,
network statistics, mobile information and statistics, and diagnostics. This information is typically
used by technical support to troubleshoot problems. To display these pages, go to
Administration > System Information.
General system information
Model
MAC Address
Firmware Version
Boot Version
POST Version
CPU Utilization
Up Time
Total/Used/Free Memory
Important: 100% CPU Utilization may indicate encryption key generation is in-
progress. On initial boot, the Digi device generates some encryption key material: an
RSA key for SSL/TLS operations, and a DSA key for SSH operations. This key-
generation process can take as long as 40 minutes. Until the RSA or DSA key is
generated, the Digi device will be unable to initiate or accept that type of encrypted
connection. The Digi device reports itself as 100% busy, but since key generation occurs
at a low priority, the device will still function normally. On subsequent reboots, the Digi
device will use its existing keys and not need to generate another unless a reset to
factory defaults is done, which will cause a new key to be generated on the next reboot.
The model of the Digi device.
A unique network identifier required for all network devices. The MAC address is on a
sticker on the Digi device and is displayed as 12 hexadecimal digits, usually starting with
00:40:9D.
The current firmware version running in the Digi device. This information may be used to
help locate and download new firmware. Firmware updates can be downloaded from:
http://support.digi.com/support/firmware.
The current boot code version running in the Digi device.
The current Power-On Self Test (POST) code version running in the Digi device.
The amount of CPU resources being used by the Digi device.
The amount of time the Digi device has been running since it was last powered on or
rebooted.
The amount of memory (RAM) available, currently in use, and currently not being used.
M o n i t o r a n d m a n a g e D i g i d e v i c e s
1 8 4

Related parts for X4-A11-W-A