TDA5230 Infineon Technologies, TDA5230 Datasheet - Page 71

no-image

TDA5230

Manufacturer Part Number
TDA5230
Description
IC RECEIVER ASK/FSK 28-TSSOP
Manufacturer
Infineon Technologies
Type
Receiverr
Datasheet

Specifications of TDA5230

Package / Case
28-TSSOP
Frequency
433MHz ~ 450MHz, 865MHz ~ 868MHz
Sensitivity
-111dBm
Data Rate - Maximum
20 kbps
Modulation Or Protocol
ASK, FSK
Applications
RKE, TPM, Security Systems
Current - Receiving
8mA
Data Interface
PCB, Surface Mount
Antenna Connector
PCB, Surface Mount
Voltage - Supply
3 V ~ 3.6 V, 4.5 V ~ 5.5 V
Operating Temperature
-40°C ~ 105°C
Operating Frequency
870 MHz
Operating Supply Voltage
3.3 V, 5 V
Maximum Operating Temperature
+ 105 C
Minimum Operating Temperature
- 40 C
Mounting Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Memory Size
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
SP000076520
TDA5230
TDA5230INTR

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
TDA5230
Manufacturer:
INF
Quantity:
9 999
Part Number:
TDA5230
Manufacturer:
NICHICON
Quantity:
5 192
Part Number:
TDA5230
Manufacturer:
INFINEON/英飞凌
Quantity:
20 000
Company:
Part Number:
TDA5230
Quantity:
4 800
Part Number:
TDA5230C3
Manufacturer:
INFINEON/英飞凌
Quantity:
20 000
Company:
Part Number:
TDA5230C3
Quantity:
50
The RSSI signal is used to determine the relative RF input signal power of a received
signal or data transmission, and for example, to estimate the transmitter distance.
RSSI can be read either from the analog output as described below, or digitally via the
peak detector registers, which are described in
To achieve a well-defined RSSI response, the offset and the gain of the RSSI generation
unit can be trimmed via the SFR control bits LIMGAIN and LIMOFFS as described later.
The bandwidth of the RSSI signal can be adapted to the data rate. It is controlled by the
SFR control bits AAFILT.
This RSSI Signal can be fed to the pin RSSI via a buffer amplifier. To enable this buffer
the SFR control bit RSSIMONE must be set.
Figure 32
RSSI is derived from four signals. Any of these four signals (RSSI+, RSSI-, REF+ and
REF-) may be routed to the pin RSSI. RSSI+ is the real RSSI signal derived from the
input signal voltage, while RSSI- is an internal offset, and REF+/- is the internal voltage
reference. The selection of the signal routed to pin RSSI is done by the SFR control bits
RSSIMTR.
Typical values are:
RSSI-...1.55 V, REF+...1.8 V, REF-...1.3 V; these values are not influenced by trimming.
The following figure shows the behavior of RSSI+ over an input signal power sweep. The
four curves show the trimming range in between minimum offset/maximum gain and
maximum offset/minimum gain, the typical RSSI+ using recommended default setting of
minimum offset / minimum gain (if RSSI trimming is not used), and the fourth curve
represents a typical trimmed RSSI+
Data Sheet
IF Path, RSSI
IFBUF-IN
IF-
Buffer-
Amp.
1
IFBUF-OUT
LIM-IN+
LIM-IN-
RSSI-Generation
67
IF-LIMITER
5
4
Chapter 2.4.8.3 RSSI Peak
2
RSSI
MUX
A
Functional Description
RSSIMONE
D
RSSIMTR
Version 4.0, 2007-06-01
To digital
FSK-Demodulator
and digital BB-
Processing
Detector.
TDA523x

Related parts for TDA5230