ATMEGA256RZBV-8CU Atmel, ATMEGA256RZBV-8CU Datasheet - Page 14

BUNDLE ATMEGA2560V/AT86RF230-ZU

ATMEGA256RZBV-8CU

Manufacturer Part Number
ATMEGA256RZBV-8CU
Description
BUNDLE ATMEGA2560V/AT86RF230-ZU
Manufacturer
Atmel
Series
ATMEGAr
Datasheet

Specifications of ATMEGA256RZBV-8CU

Frequency
2.4GHz
Modulation Or Protocol
802.15.4 Zigbee
Applications
ISM, ZigBee™
Power - Output
3dBm
Sensitivity
-101dBm
Voltage - Supply
1.8 V ~ 3.6 V
Current - Receiving
15.5mA
Current - Transmitting
16.5mA
Data Interface
PCB, Surface Mount
Memory Size
256kB Flash, 4kB EEPROM, 8kB RAM
Antenna Connector
PCB, Surface Mount
Package / Case
100-TFBGA
Wireless Frequency
2.4 GHz
Interface Type
SPI, USART
Output Power
3 dBm
For Use With
ATAVRISP2 - PROGRAMMER AVR IN SYSTEMATJTAGICE2 - AVR ON-CHIP D-BUG SYSTEM
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Operating Temperature
-
Data Rate - Maximum
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
ATmega256
6.1.1.4 Notifications (+N and +T)
6.1.2 Examples using PC
6.1.2.1 Start a new network
14
AVR414
The ”+N” and ”+T” commands are used to respectively indicate that a device has
associated to the network and that data was received. See Table 6-4 and
Table 6-5 for details.
Table 6-4. AT command and possible responses
Table 6-5. AT command and possible responses
As mentioned previously all commands given in subsection 6.1.1.1 through
subsection 6.1.1.3 can be tested having the STK501 top module connected to a PC
using a RS232 cable. The default communication settings of the evaluation
application can be found in Table 6-6. The reminder of this subsection gives some
example scripts and comments.
Table 6-6. Communication Settings
Command
Notes:
Command
“+N”
Command
“+T: [length]
Notes:
Setting
Bits per second
Data bits
Parity
Stop bits
Flow control
AT+R
OK
AT+C: 0B,BAAD,C
4. Length in bytes of data payload.
5. Array containing the data payload.
1. Length in bytes of received data.
2. Array containing the received data.
1
,[data]
2
//Reset hardware and IEEE 802.15.4 Stack.
//Command terminated successfully.
//Start network on channel 11 with PANID = BAAD.
Response
”ERROR: 0x8B”
Response
Response
Value
38400
8
None
1
None
Comment
One of the command’s
parameters is invalid.
Comment
Device associated successfully.
Only valid for coordinators.
Comment
Data received successfully.
Valid for both peers.
Comment
CTS and DTS line not used.
8051A-AVR-11/06

Related parts for ATMEGA256RZBV-8CU