ATMEGA256RZBV-8CU Atmel, ATMEGA256RZBV-8CU Datasheet - Page 17

• Manufacturer Part Number: ATMEGA256RZBV-8CU
• Description: BUNDLE ATMEGA2560V/AT86RF230-ZU
• Manufacturer: Atmel
• Series: ATMEGAr

Specifications of ATMEGA256RZBV-8CU

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: ISM, ZigBee™
• Power - Output: 3dBm
• Sensitivity: -101dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 15.5mA
• Current - Transmitting: 16.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 256kB Flash, 4kB EEPROM, 8kB RAM
• Antenna Connector: PCB, Surface Mount
• Package / Case: 100-TFBGA
• Wireless Frequency: 2.4 GHz
• Interface Type: SPI, USART
• Output Power: 3 dBm
• For Use With: ATAVRISP2 - PROGRAMMER AVR IN SYSTEMATJTAGICE2 - AVR ON-CHIP D-BUG SYSTEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Data Rate - Maximum: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: ATmega256

8051A-AVR-11/06
named “AVR414.jar” in the “bin” folder. A screen like that depicted in Figure 6-3
should now be visible. Now proceed with one of the following steps:
1. Step A: Start the Coordinator: Starts a new network. Peer becomes coordinator.
2. Step B: Start the End-device: Associate to an existing network. Peer becomes
Figure 6-3 Chat Client Start Screen
Step A: Start the Coordinator
3. From the screen shown in Figure 6-3, press the “Connect” button.
4. The “COM Settings” dialog box will now appear. From the drop down list, select the
5. Then in the “Device Options” dialog select the channel and PANID to start the
6. If the channel and PANID entered was valid, a new tab will be added to the chat
7. Proceed with Step B to add an end-device to the network.
end-device.
serial port where the STK501 board is connected. Press “OK”.
network on. Check the “Coordinator” option as seen in Figure 6-4. Press “OK”.
client containing a text area with the text: “Network not started yet”. This is just an
notification that an end-device must associate before it is possible to chat.
AVR414
17