A22L-10A Omron, A22L-10A Datasheet - Page 30

• Manufacturer Part Number: A22L-10A
• Description: CONTACT BLOCK ALT SPST
• Manufacturer: Omron
• Type: Switch Blockr
• Series: A22r

Specifications of A22L-10A

• Accessory Type: Contact Block
• Illumination: Not Illuminated
• Contact Rating: 10 Amps at 110 VoltsAC/DC
• Mounting Style: Panel
• Termination Style: Screw
• For Use With/related Products: A22 Series
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: A22 Series
• Other names: A22L10A

Safety Precautions for All Pushbutton Switches
For the individual precautions for a Switch, refer to the Safety Precautions in the section for that Switch.
WARNING
Do not perform wiring with power supplied to the
Switch. Do not touch the terminals or other charged
parts of the Switch while power is being supplied.
Doing so may result in electric shock.
Caution
Do not apply a voltage between the incandescent lamp
and the terminal that is greater than the rated voltage.
Doing so may damage the lamp or LED and cause the
Operation Unit to pop out.
Always turn OFF the power and wait for 10 minutes
before replacing the incandescent lamp. If the lamp is
replaced immediately after the power is turned OFF,
the remaining heat may cause burns.
Precautions for Correct Use
For details, refer to the Precautions for Correct Use in the
Technical Guide for Pushbutton Switches.
C-1
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.