B3W-9000-B1B Omron, B3W-9000-B1B Datasheet - Page 8
![SWITCH TACT ILLUM SPST-NO BLUE](/photos/15/35/153577/b3w-9000-b1b_sml.jpg)
B3W-9000-B1B
Manufacturer Part Number
B3W-9000-B1B
Description
SWITCH TACT ILLUM SPST-NO BLUE
Manufacturer
Omron
Series
B3W-9r
Specifications of B3W-9000-B1B
Circuit
SPST-NO
Switch Function
Off-Mom
Contact Rating @ Voltage
0.05A @ 24VDC
Actuator Type
Square Button
Mounting Type
Through Hole
Orientation
Vertical
Outline
10.00mm x 10.00mm
Illumination
Illuminated
Operating Force
160gf
Actuator
Square
Termination Style
Pin
Body Size
10 mm L x 10 mm W x 11 mm H
Color
Blue
Operating Temperature Range
- 25 C to + 70 C
Contact Configuration
SPST-NO
Contact Voltage Dc Nom
24V
Contact Current Max
50mA
Actuation Type
Top
Switch Terminals
Through Hole
Circuitry
SPST-NO
Rohs Compliant
Yes
Actuator / Cap Color
Blue
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
B3W-9000-B1B
B3W9000B1B
SW1037
B3W9000B1B
SW1037
Removing the Cap - Text Film Installation
Placing the Cap on the Switch
Hold the Cap at the side away from the mating section. Push straight
down until the mating section meets.
Removing the Cap
The Cap can be removed up to two times. Excessively removing the
Cap will cause the mating section to become weak, resulting the
operating section not mating completely or the Cap may fall off.
Film Dimensions
Dimensions of the film are shown below. The thickness is 0.2 mm.
264
1. Hold the cap at the side away from the mating section. Pull
2. Do not remove the cap while the Switch is mounted. Doing so
straight up.
will apply force to the soldered section and LEDs, resulting in
malfunction.
Illuminated Tactile Switches
Correct
Correct
7.4±0.1
7.4±0.1
Incorrect
Incorrect
8.9±0.1
8.9±0.1
B3W-9
Dust Protection
Although the switching mechanism is a sealed structure (IP64), illu-
mination part and actuation part is not sealed. Ensure you have the
correct environmental conditions for installation. Use a protective
sheet or take other measures to protect against dust.
Sensitivity to Static Electricity
Switches with high-brightness green (HG) or blue (B) LEDs are sus-
ceptible to static electricity. Take care when handling switches with
these LEDs as the LEDs may be damaged.
Storage Precautions
Storage Environment
To prevent degradation, such as discoloration, of the terminals during
storage, do not store the Switch in locations that are subject to the
following conditions.
Storage condition
Store the Switches in the packaging box.
After the packaging box is opened, use the contents as quickly as
possible. When storing leftover parts, make sure that appropriate
measures are taken against humidity and corrosive gases.
Agreement of Product Use
Comply with the usage, storage, and disposal conditions specified by
OMRON as outlined in the precautions in the product datasheet and
specifications.
Be sure to read the precautions common to all Tactile Switches, con-
tained in the Technical User’s Guide, “Tactile Switches, Technical
Information” for correct use
1. High temperature or humidity
2. Corrosive gases
3. Direct sunlight