62-2324-2001-8 3M, 62-2324-2001-8 Datasheet
62-2324-2001-8
Specifications of 62-2324-2001-8
62-2324-2001-8 Summary of contents
Page 1
... AF111 for Electronics Applications Technical Data Product Description 3M™ Bonding Film AF111 is an epoxy, thermoset film adhesive developed for structural bonding of metals and high-strength plastic materials (epoxy and phenolic). Bonding Film AF111 must be stored at or below 40°F (4°C) before use. Key Features • ...
Page 2
... Bonding Film AF111 for Electronics Applications Suggested Use Room Temperature Work Life – 3M™ Bonding Film AF111 has a room Procedure temperature work life of 4 weeks. Work life is defined as the time at room temperature that the product will still yield the performance data summarized in this data sheet if bonds are made and tested per instructions. Shelf Life – ...
Page 3
... OLS bonds were 1" x 0.5" and tested at 0.2"/minute. • Bonds were cured 60 minutes (+ 7 minutes ramp time) at 250°F (121°C). • The polyimide and polyester films were overbonded to CRS using 3M™ Scotch-Weld™ Epoxy Adhesive DP-190. *Note: When using solvents, extinguish all ignition sources and follow the or typical only and should not be used for specification purposes. ® ...
Page 4
... Bonds were cured 60 minutes (+ 7 minutes ramp time) at 250°F (121°C). • The polyimide and polyester films were overbonded to CRS using 3M™ Scotch-Weld™ Epoxy Adhesive DP-190. *Note: When using solvents, extinguish all ignition sources and follow the or typical only and should not be used for specification purposes. ® ...
Page 5
... RH 30 days immersion in distilled water Hot/cold cycling * OLS (overlap shear) bonds consisted of 3M™ Scotch-Brite™ Scour Pad (green) abraded CRS to CRS, cured 60 minutes + 7 minutes (ramp time) at 250°F (121°C) and tested at 0.2"/minute speed. • Hot/cold cycle was 17 hours at 120°F (49°C) and 5 hours at -5°F (-21°C) with one hour at room temperature between temperature changes ...
Page 6
... OLS bonds were 0.5" x 1" (CRS, 3M™ Scotch-Brite™ Scour Pad [green] abraded, solvent wiped). • Peel bonds were 0.5" wide, 10 mil etched aluminum strips bonded to 0.047" FR-4 board. • Both OLS and peel bonds were made and tested in similar fashion described in previous sections ...
Page 7
... Method 3M™ Bonding Film AF111 ASTM D-150 4 kilohertz 4 kilohertz 3.9 @ 100 kilohertz ASTM D-150 .005 @ 1 kilohertz .007 @ 10 kilohertz .011 @ 100 kilohertz ASTM D-149 ...
Page 8
... Warranty and The 3M product will be free from defects in material and manufacture for a period of one (1) year from the date of manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, Limited Remedy ...