NUC100LC1BN Nuvoton Technology Corporation of America, NUC100LC1BN Datasheet - Page 481

• Manufacturer Part Number: NUC100LC1BN
• Description: IC MCU 32BIT 32KB FLASH 48LQFP
• Manufacturer: Nuvoton Technology Corporation of America
• Series: NuMicro™r

Specifications of NUC100LC1BN

• Core Processor: ARM Cortex-M0
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, I²S, LVD, POR, PS2, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

[11]
[10]
[9]
[8]
[7:4]
[3]
[2]
[1]
NuMicro™ NUC100 Series Technical Reference Manual
RXFULL
RXTHF
RXOVF
RXUDF
Reserved
RIGHT
I2STXINT
I2SRXINT
Receive FIFO full
This bit reflect data words number in receive FIFO is 8
1 = Full
0 = Not full
This bit is read only.
Receive FIFO threshold flag
When data word(s) in receive FIFO is equal or higher than threshold value set in
RXTH[2:0] the RXTHF bit becomes to 1. It keeps at 1 till RXFIFO_LEVEL[3:0] less
than RXTH[1:0] after software read RXFIFO register.
1 = Data word(s) in FIFO is equal or higher than threshold level
0 = Data word(s) in FIFO is lower than threshold level
This bit is read only
Receive FIFO overflow flag
When receive FIFO is full and receive hardware attempt write to data into receive FIFO
then this bit is set to 1, data in 1st buffer is overwrote.
1 = Overflow occur
0 = No overflow occur
Software can write 1 to clear this bit to zero
Receive FIFO underflow flag
Read receive FIFO when it is empty, this bit set to 1 indicate underflow occur.
1 = Underflow occur
0 = No underflow occur
Software can write 1 to clear this bit to zero
Reserved
Right channel
This bit indicate current transmit data is belong to right channel
1 = Right channel
0 = Left channel
This bit is read only
I
1 = Transmit interrupt
0 = No transmit interrupt
This bit is read only
I
1 = Receive interrupt
0 = No receive interrupt
This bit is read only
2
2
S transmit interrupt
S receive interrupt
- 481 -
Publication Release Date: Oct 22, 2010
Revision V1.06