AH322-S8G TriQuint, AH322-S8G Datasheet - Page 8

• Manufacturer Part Number: AH322-S8G
• Description: RF Amplifier 2W RF AMP 400-2700MHz
• Manufacturer: TriQuint
• Type: General Purpose Amplifierr

Specifications of AH322-S8G

• Mounting Style: SMD/SMT
• Number Of Channels: 1
• Operating Frequency: 2700 MHz
• Noise Figure: 4.8 dB @ 2700 MHz
• Operating Supply Voltage: 5 V
• Supply Current: 500 mA
• Maximum Operating Temperature: + 200 C
• Package / Case: SOIC-8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1070573

TriQuint Semiconductor, Inc • Phone [phone] • FAX: [phone] • e-mail: [e-mail] • Web site: www.TriQuint.com
AH322
2W High Linearity InGaP HBT Amplifier
1. A heatsink underneath the area of the PCB for the mounted device is strictly required for proper thermal operation. Damage to the
2. Ground / thermal vias are critical for the proper performance of this device. Vias should use a .35mm (#80 / .0135”) diameter drill
3. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance.
4. Mounting screws can be added near the part to fasten the board to a heatsink. Ensure that the ground / thermal via region contact the
5. Do not put solder mask on the backside of the PC board in the region where the board contacts the heatsink.
6. RF trace width depends upon the PC board material and construction.
7. Use 1 oz. Copper minimum.
8. All dimensions are in millimeters (inches). Angles are in degrees.
device can occur without the use of one.
and have a final plated thru diameter of .25 mm (.010”).
heatsink.
This package is lead-free/green/RoHS-compliant. The plating material on the leads is NiPdAu. It is compatible with both lead-free
Mounting Configuration / Land Pattern
(maximum 260 °C reflow temperature) and lead (maximum 245 °C reflow temperature) soldering processes.
Mounting Config. Notes
Outline Drawing
Mechanical Information
The component will be marked with an
“AH322G” designator with an alphanumeric lot
code on the top surface of the package.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
ESD Rating: Class 1A
Value:
Test:
Standard:
ESD Rating: Class III
Value:
Test:
Standard:
MSL Rating: Level 3 at +260 °C convection reflow
Standard:
ESD / MSL Information
Functional Diagram
Product Marking
Output / Vcc
Function
1
2
3
4
Vbias
GND
GND
Input
Iref
Passes ≥ 250V to < 500V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
Passes ≥ 1000V min.
Charged Device Model (CDM)
JEDEC Standard JESD22-C101
JEDEC Standard J-STD-020
Backside Paddle
Pin No.
2, 4, 5
6, 7
8
3
1
8
7
6
5
April 2009
.