A3P250-VQG100 Actel, A3P250-VQG100 Datasheet - Page 12

• Manufacturer Part Number: A3P250-VQG100
• Description: FPGA - Field Programmable Gate Array 250K System Gates
• Manufacturer: Actel

Specifications of A3P250-VQG100

• Processor Series: A3P250
• Core: IP Core
• Maximum Operating Frequency: 350 MHz
• Number Of Programmable I/os: 157
• Data Ram Size: 36864
• Delay Time: 11.1 ns
• Supply Voltage (max): 1.575 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Development Tools By Supplier: A3PE-Proto-Kit, A3PE-Brd1500-Skt, Silicon-Explorer II, Silicon-Sculptor 3, SI-EX-TCA, FlashPro 4, FlashPro 3, FlashPro Lite
• Mounting Style: SMD/SMT
• Supply Voltage (min): 1.425 V
• Number Of Gates: 250 K
• Package / Case: VQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ProASIC3 Device Family Overview
1 - 6
In addition, every SRAM block has an embedded FIFO control unit. The control unit allows the SRAM
block to be configured as a synchronous FIFO without using additional core VersaTiles. The FIFO width
and depth are programmable. The FIFO also features programmable Almost Empty (AEMPTY) and
Almost Full (AFULL) flags in addition to the normal Empty and Full flags. The embedded FIFO control
unit contains the counters necessary for generation of the read and write address pointers. The
embedded SRAM/FIFO blocks can be cascaded to create larger configurations.
PLL and CCC
ProASIC3 devices provide designers with very flexible clock conditioning capabilities. Each member of
the ProASIC3 family contains six CCCs. One CCC (center west side) has a PLL. The A3P015 and
A3P030 devices do not have a PLL.
The six CCC blocks are located at the four corners and the centers of the east and west sides.
All six CCC blocks are usable; the four corner CCCs and the east CCC allow simple clock delay
operations as well as clock spine access.
The inputs of the six CCC blocks are accessible from the FPGA core or from one of several inputs
located near the CCC that have dedicated connections to the CCC block.
The CCC block has these key features:
Additional CCC specifications:
Global Clocking
ProASIC3 devices have extensive support for multiple clocking domains. In addition to the CCC and PLL
support described above, there is a comprehensive global clock distribution network.
Each VersaTile input and output port has access to nine VersaNets: six chip (main) and three quadrant
global networks. The VersaNets can be driven by the CCC or directly accessed from the core via
multiplexers (MUXes). The VersaNets can be used to distribute low-skew clock signals or for rapid
distribution of high fanout nets.
•
•
•
•
•
•
•
•
•
•
•
•
Wide input frequency range (f
Output frequency range (f
Clock delay adjustment via programmable and fixed delays from –7.56 ns to +11.12 ns
2 programmable delay types for clock skew minimization
Clock frequency synthesis (for PLL only)
Internal phase shift = 0°, 90°, 180°, and 270°. Output phase shift depends on the output divider
configuration (for PLL only).
Output duty cycle = 50% ± 1.5% or better (for PLL only)
Low output jitter: worst case < 2.5% × clock period peak-to-peak period jitter when single global
network used (for PLL only)
Maximum acquisition time = 300 µs (for PLL only)
Low power consumption of 5 mW
Exceptional tolerance to input period jitter— allowable input jitter is up to 1.5 ns (for PLL only)
Four precise phases; maximum misalignment between adjacent phases of 40 ps × (350 MHz /
f
OUT_CCC
) (for PLL only)
OUT_CCC
IN_CCC
) = 0.75 MHz to 350 MHz
) = 1.5 MHz to 350 MHz
R e vi s i o n 9