UTG18-AC Souriau Connection Technology, UTG18-AC Datasheet - Page 28

• Manufacturer Part Number: UTG18-AC
• Description: CABLE CLAMP W/STRAIN RELIEF #18
• Manufacturer: Souriau Connection Technology
• Series: Trim Trio® UTGr
• Type: Clampr

Specifications of UTG18-AC

• Cable Opening: 0.197" ~ 0.748" (5.00mm ~ 19.00 mm)
• Shell Size - Insert: 18
• Thread Size: 1 1/16-18
• Features: Strain Relief
• Operating Temp Range: -55C to 125C
• Product Length (mm): 50mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Diameter: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: SOU1127; UTG1-8AC; UTG18AC

How to assemble shielded connectors ...
Put all parts over the cable, including the coupling ring, as shown on the picture.
Strip the outer jacket with the dimensions given in the table.
Bend the braid backwards over the cable jacket.
Strip the wires (refer to contact section).
Crimp the contacts.
Bend the braid back over the conical part of the inner shielding
ferrule.
Cut the shield so that it does not pass the front edge as shown
Shielded connectors
Insert contact into connector.
Slide inner shielding ferrule over the connector.
Wrap shielding around inner shielding ferrule using a conductive
tape.
.Make sure that the braid is wrapped equally around the ferrule to
avoid misalignment when assembled.
Recommended cable strip dimensions
25