UD2-5NU NEC, UD2-5NU Datasheet - Page 4

• Manufacturer Part Number: UD2-5NU
• Description: Low Signal Relays - PCB DPDT NL 5VDC
• Manufacturer: NEC
• Series: UC2/UD2r

Specifications of UD2-5NU

• Contact Form: 2 Form C (DPDT)
• Coil Voltage: 5 V
• Coil Current: 1 A
• Coil Type: Non-Latching
• Power Consumption: 140 mW
• Termination Style: SMT
• Maximum Switching Current: 1 A
• Contact Rating: 1 A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4
PERFORMANCE CHARACTERISTICS (Community)
RECOMMENDED RELAY DRIVE CONDITIONS
Drive under conditions. If it is impossible, please inquire to NEC/TOKIN.
Contact Form
Contact Ratings
Minimun Contact Ratings
Initial Contact Resistance
Contact Material
Nominal Operating Power
Operate Time (Excluding Bounce)
Release Time (Excluding Bounce)
Insulation Resistance
Breakdown Voltage
Shock Resistance
Vibration Resistance
Ambient Temperature
Coil Temperature Rise
Running specifications
Weight
∗1
∗2
∗3
∗4
Single coil latch type
rise time : 10 µ s, decay time to half crest : 160 µ s
rise time : 2 µ s, decay time to half crest : 10 µ s
This shows a number of operation where it can be running by which a fatal is not caused, and number of operation by which a
This value is a reference value in the resistive load.
Minimum capacity changes depending on switching frequency and enviroment temperature and the load.
steady characteristic is maintained is 1 × 10
Nonlatch type
Square pulse (rise and fall time is rapidly)
Pulse height : within ±5% at nomianl voltage
Pulse width : More than 10 ms
Voltage : within ±5% st nominal voltage
Maximum Switching Power
Maximum Switching Voltage
Maximum Switching Current
Maximum Carrying Current
Non-Latch Type
Single Coil Latch Type
Between Open Contacts
Between Adjacent Contacts
Between Coil and Contacts
No-load
Load
7
operations.
2 Form c
30W (resistive)
220 Vdc
1 A
1 A
10 mV.dc, 10 µ A
100 mΩ Max. (Initial)
Silver alloy with gold alloy overlay
140 to 230 mW
100 to 120 mW
Approximately 2 ms
Approximately 1 ms without diode
1000 MΩ at 500 Vdc
1000 Vac for one minute (1500 V surge, 10 × 160 µ s
1500 Vac for one minute (2500 V surge, 2 × 10 µ s
735 m / s
980 m / s
10 to 55 Hz at double amplitude of 3 mm
(misoperating)
10 to 55 Hz, double amplitude of 5 mm
(Destructive failure)
–40 to +85°C
18 degrees at nominal coil voltage (140 mW)
5 × 10
1 × 10
30 Vdc 1 A (resistive), 1 × 10
125 Vac 0.3 A (resistive), 1 × 10
Approximately 0.8 grams
Ambient temperature
7 ∗3
7
operations (Latch type)
−40 ∼ +85°C
2
2
operations (Non-latch type)
(misoperating)
(destructive failure)
∗4
5
UC2/UD2 SERIES
37.5 VA (resistive)
250 Vac
operations at 20°C
5
operations at 20°C
Ph [phone] Fx [phone]
www.worldproducts.com
e-mail: [e-mail]
WORLD PRODUCTS INC.
∗1
)
∗1
)