PIC18F45K80-I/PT Microchip Technology, PIC18F45K80-I/PT Datasheet - Page 425

• Manufacturer Part Number: PIC18F45K80-I/PT
• Description: MCU PIC 32KB FLASH 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F45K80-I/PT

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Number Of I /o: 35
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP
• Controller Family/series: PIC18
• Ram Memory Size: 4KB
• Cpu Speed: 16MIPS
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, SPI, USART
• Processor Series: PIC18F45K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

27.2.3.2
This section describes the message acceptance filters
and masks for the CAN receive buffers.
REGISTER 27-37: RXFnSIDH: RECEIVE ACCEPTANCE FILTER ‘n’ STANDARD IDENTIFIER FILTER
REGISTER 27-38: RXFnSIDL: RECEIVE ACCEPTANCE FILTER ‘n’ STANDARD IDENTIFIER FILTER
 2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4
bit 3
bit 2
bit 1-0
Note 1:
R/W-x
SID10
R/W-x
SID2
2:
Registers, RXF6SIDH:RXF15SIDH, are available in Mode 1 and 2 only.
Registers, RXF6SIDL:RXF15SIDL, are available in Mode 1 and 2 only.
In Mode 0, this bit must be set/cleared as required, irrespective of corresponding mask register value.
Message Acceptance Filters
and Masks
SID<10:3>: Standard Identifier Filter bits (if EXIDEN = 0 )
Extended Identifier Filter bits, EID<28:21> (if EXIDEN = 1 ).
SID<2:0>: Standard Identifier Filter bits (if EXIDEN = 0 )
Extended Identifier Filter bits, EID<20:18> (if EXIDEN = 1 ).
Unimplemented: Read as ‘ 0 ’
EXIDEN: Extended Identifier Filter Enable bit
1 = Filter will only accept extended ID messages
0 = Filter will only accept standard ID messages
Unimplemented: Read as ‘ 0 ’
EID<17:16>: Extended Identifier Filter bits
R/W-x
R/W-x
SID9
SID1
REGISTERS, HIGH BYTE [0  n  15]
REGISTERS, LOW BYTE [0  n  15]
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
R/W-x
R/W-x
SID8
SID0
R/W-x
SID7
U-0
Preliminary
—
U = Unimplemented bit, read as ‘0’
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
‘0’ = Bit is cleared
PIC18F66K80 FAMILY
EXIDEN
(2)
R/W-x
R/W-x
SID6
(1)
(1)
(2)
R/W-x
SID5
U-0
—
x = Bit is unknown
x = Bit is unknown
R/W-x
R/W-x
EID17
SID4
DS39977C-page 425
EID16
R/W-x
R/W-x
SID3
bit 0
bit 0