UPD78F0413GA-GAM-AX NEC, UPD78F0413GA-GAM-AX Datasheet - Page 188

• Manufacturer Part Number: UPD78F0413GA-GAM-AX
• Description: 8BIT UC, 32K FLASH, 1KB RAM, LCD
• Manufacturer: NEC

Specifications of UPD78F0413GA-GAM-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 30
• Ram Memory Size: 1024Byte
• Cpu Speed: 10MHz
• No. Of Timers: 8
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 32KB
• Oscillator Type: External, Internal

188
(d) Prescaler mode register 00 (PRM00)
(e) 16-bit timer counter 00 (TM00)
(f) 16-bit capture/compare register 000 (CR000)
(g) 16-bit capture/compare register 010 (CR010)
ES101
0/1
By reading TM00, the count value can be read.
When this register is used as a compare register and when its value matches the count value of TM00, an
interrupt signal (INTTM000) is generated. The count value of TM00 is not cleared.
To use this register as a capture register, select either the TI000 or TI010 pin input as a capture trigger.
When the valid edge of the capture trigger is detected, the count value of TM00 is stored in CR000.
When this register is used as a compare register and when its value matches the count value of TM00, an
interrupt signal (INTTM010) is generated. The count value of TM00 is not cleared.
When this register is used as a capture register, the TI000 pin input is used as a capture trigger. When the
valid edge of the capture trigger is detected, the count value of TM00 is stored in CR010.
ES100
0/1
Figure 6-39. Example of Register Settings in Free-Running Timer Mode (2/2)
ES001
0/1
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00
ES000
0/1
User’s Manual U18698EJ1V0UD
3
0
PRM002 PRM001 PRM000
0/1
0/1
0/1
Count clock selection
(setting TI000 valid edge is prohibited)
00: Falling edge detection
01: Rising edge detection
10: Setting prohibited
11: Both edges detection
00: Falling edge detection
01: Rising edge detection
10: Setting prohibited
11: Both edges detection
(setting prohibited when CRC001 = 1)