HA-C5 IDEC, HA-C5 Datasheet - Page 164
HA-C5
Manufacturer Part Number
HA-C5
Description
HA-C5 L6 Contact SPDT Silver Solder
Manufacturer
IDEC
Datasheet
1.HA-C5.pdf
(213 pages)
Specifications of HA-C5
No. Of Poles
1
Contact Current Max
3A
Contact Voltage Ac Max
250V
Contact Voltage Dc Max
125V
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
L6 Series Miniature Switches And Pilot Devices
- Current page: 164 of 213
- Download datasheet (6Mb)
A3
ø22mm - TW Series
Pilot Lights and Pushbuttons
IMPORTANT: Install the body of the TW control unit with the panel thickness scale facing up.
Octagonal and Round Bezels
Octagonal and round bezels screw into the operator. Use the locking ring wrench (optional) for secure tightening and easy removal. Round flush and extended but-
tons snap onto the operator base. Mushroom buttons screw onto the operator base.
Every round lens can be used with or without legend markings. Engraving can be done on a white translucent plate which is placed in the lens, or clear mylar can
be printed and placed in the lens.
Square Bezels
Square bezels are installed in a 3-step procedure. First install the base plate from the front. Then install the lock nut using the nut locking wrench (optional).
Finally, install the square bezel, which snap-fits onto the base plate. Square buttons also snap onto the operator base.
Every square lens can be used with or without legend markings. Engraving can be done on a white translucent plate which is placed in the lens, or clear mylar can
be printed and placed in the lens. Square units include a round waterproof lens which screws into the operator. The square outer lens snaps on.
To remove square lens from operator, place a screwdriver under the indentation on the side of the lens. To remove the marking plate, place a screwdriver under
the indentation and lift out the plate. The lens retainer can be removed by pressing a 3/16" screwdriver into one of the recesses.
Marking Plate Engraving Area
A3-164
www.idec.com
Shape
Round
Mushroom
Square
Square
Round
Marking
Unit
Square
Marking
Units
Oiltight Switches & Pilot Devices
Engraving Area
Ø 0.55" (14mm)
Ø 0.55" (14mm)
Ø 0.55" (14mm)
0.83" (21mm)
0.83" (21mm)
under lens.
marking
under lens.
Insert
plate
marking
Insert
plate
Instructions con’t
Pilot Light
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
Used With
Illuminated pushbuttons
Pilot lights
Illuminated mushroom
Square pilot lights
Square illuminated
pushbuttons
under lens.
marking
Insert
plate
Press in
round flush
and extended
lens. Screw in
mushroom lens.
Illuminated
Pushbutton
ALW2B
APW2B
ALW3B
APQW1B
Part Number
ALQW2B
Related parts for HA-C5
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
CONTACT BLOCK, SPDT, 100mA, SOLDER LUG
Manufacturer:
IDEC
Datasheet:
Part Number:
Description:
CONTACT BLOCK, DPDT, 100mA, SOLDER LUG
Manufacturer:
IDEC
Datasheet:
Part Number:
Description:
CONTACT BLOCK, DPDT, 5A, SOLDER LUG
Manufacturer:
IDEC
Datasheet:
Part Number:
Description:
CONTACT BLOCK, SPDT, 100mA, SOLDER LUG
Manufacturer:
IDEC
Datasheet:
Part Number:
Description:
CONTACT BLOCK, SPDT, 3A, THROUGH HOLE
Manufacturer:
IDEC
Datasheet:
Part Number:
Description:
Cover, Switch; Not Applicable; Yellow; HA Series; IP20
Manufacturer:
IDEC Corporation
Datasheet:
Part Number:
Description:
Cable; Between IDEC MicroSmart (port 1 or 2) and HG2F/3F/4F; 5 ft.
Manufacturer:
IDEC Corporation
Datasheet:
Part Number:
Description:
88SE6440 PCIe by 4, 3Gpbs SAS/SATA 4 internal ports Controller Board
Manufacturer:
Marvell
Part Number:
Description:
INDICATOR INCANDESCENT LAMP, GREEN
Manufacturer:
IDEC
Datasheet:
Part Number:
Description:
LAMP, INDICATOR, INCAND, AMB
Manufacturer:
IDEC
Datasheet:
Part Number:
Description:
LAMP, INDICATOR, INCAND, GRN
Manufacturer:
IDEC
Datasheet:
Part Number:
Description:
LAMP, INDICATOR, INCAND, GRN
Manufacturer:
IDEC
Datasheet: