QS30LDLQ BANNER ENGINEERING, QS30LDLQ Datasheet - Page 2

• Manufacturer Part Number: QS30LDLQ
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Laserr

Specifications of QS30LDLQ

• Output Current: 150mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Sensor Housing: Rectangular
• Sensor Input: Laser
• Body Material: ABS Plastic
• Supply Voltage Max: 30VDC
• Sensing Range Max: 800mm
• Brand/series: QS30
• Current, Switching: 150 mA
• Function: Proximity
• Ip Rating: IP67
• Mounting Type: Threaded
• Output: NPN/PNP
• Primary Type: Photoelectric
• Range, Measurement: 800 mm
• Sensing Mode: Diffuse
• Technology: Photoelectric
• Termination: 5-Wire Connector
• Voltage, Supply: 30 VDC
• Lead Free Status / Rohs Status: RoHS Exempt Product

WORLD-BEAM
QS30AF Adjustable-Field Sensor
®
Overview
The QS30AF is an easy-to-use triangulation sensor which provides a sophisticated,
yet cost-effective solution for demanding applications.
The sensor features two identically configured outputs, one each NPN and PNP.
The sensor’s compact housing has a large, easy-to-see bargraph display plus
bright LEDs for easy configuration and status monitoring during operation. The
sensor can be side-mounted, using its integral mounting holes, or front-mounted,
via its 30 mm threaded barrel.
Optical Triangulation
The function of the QS30AF Sensor is based on optical triangulation (see Figure
2). The emitter circuitry and optics create a light source which is directed toward a
target. The light source bounces off the target, scattering some of its light through
the sensor’s receiver lens to its position-sensitive-device (PSD) receiver element.
The target’s distance from the receiver determines the light’s angle to the receiver
element; this angle determines where the returned light falls on the PSD receiver
element.
The position of the light on the PSD receiver element is processed through digital
electronics and analyzed by the microprocessor. The microprocessor will compare
the target position to the cutoff limits and then change the outputs as required.
Banner Engineering Corp.
Minneapolis, MN U.S.A.
•
www.bannerengineering.com • Tel: [phone]
2
P/N 111384 rev. D