E2AM12KS04M1C1 Omron, E2AM12KS04M1C1 Datasheet - Page 7
![Inductive Proximity Sensor](/photos/20/0/200032/4473145_sml.jpg)
E2AM12KS04M1C1
Manufacturer Part Number
E2AM12KS04M1C1
Description
Inductive Proximity Sensor
Manufacturer
Omron
Specifications of E2AM12KS04M1C1
Sensing Range
4mm
Supply Voltage Range Dc
12V To 24V
Circuitry
SPST-NO
Mounting Type
M12
Switch Terminals
Connector
Sensing Face Diameter
12mm
Supply Voltage Min
12VDC
Sensor Output
NPN
Svhc
No SVHC (15-Dec-2010)
Frequency Response Max
1000Hz
Length
48mm
Output Type
NPN
Sensing Range Max
4mm
Supply Voltage Dc Max
24VDC
Connector Type
M12 Connector
Rohs Compliant
Yes
Contact Configuration
NPN
Ip/nema Rating
IP67
Load Current Max
200mA
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
DC 2-wire Models
Note 1. The response frequency is an average value. Measurement conditions are as follows: standard target, a distance of twice the standard
Cylindrical Proximity Sensor
Sensing distance
Setting distance
Differential travel
Target
Standard target
Response frequency (See note 1.)
Power supply voltage
(operating voltage range)
Leakage current
Output type
Control
output
Indicator (see timing chart)
Operation mode
Protection circuit
Ambient temperature
Temperature influence
Ambient humidity
Voltage influence
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Standard and listings
Connection method
Weight
(packaged)
Material
2. When using any model at an ambient temperature between -40°C and -25°C and a power voltage between 30 and 32 VDC, use a load
3. UL (CSA) [E196555]: Use class 2 circuit only.
target distance between targets, and a setting distance of half the sensing distance.
current of 50 mA max.
Item
Load current
(See note 2.)
Residual voltage
Pre-wired model
Connector model
Case
Sensing surface
Cable
Clamping nut
Type
Size
E2A
1.5 mm ± 10%
0 to 1.2 mm
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal.)
8× 8× 1 mm
2,000 Hz
12 to 24 VDC. Ripple (p-p): 10% max.
(10 to 32 VDC)
0.8 mA max.
DC 2 wire type
3 to 100 mA
3 V max. (under load current of 100 mA with cable length of 2 m)
NO type: Operation indicator (Yellow), Setting indicator (Red)
NC type: Operation indicator (Yellow)
-D1 models: NO
-D2 models: NC
Surget suppressor, Short circuit protection
Operating: -40°C to 70°C, Storage: -40°C to 85°C (with no icing or condensation)
±10% max. of sensing distance at 23°C within temperature range of -25°C to 70°C
±15% max. of sensing distance at 23°C within temperature range of -40°C to 70°C
Operating: 35% to 95%, Storage: 35% to 95%
±1% max. of sensing distance in rated voltage range ±15%
50 MΩ min. (at 500 VDC) between current carry parts and case
1,000 VAC at 50/60 Hz for 1 min between current carry parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
500 m/s
IP67 after IEC 60529
IP69k after DIN 40050
EMC after EN60947-5-2
UL (CSA) E196555 (see note 3.)
Pre-wired models (standard is dia 4mm PVC cable with length = 2m).
Please see chapter 'Connectivity' for details on different cable materials and lenghts and M8 or M12
connectors.
Approx. 65 g
M12 connector models: Approx. 20 g
M8 connector models: Approx. 15 g
Stainless steel
PBT
Standard cable is PVC dia 4mm.
For other cable materials or diameters please refer to chapter 'Connectivity'
Brass-nickel plated
E2A-S08@S01-D@
Shielded
2
, 10 times each in X, Y and Z directions
M8
1,000 Hz
2 mm ± 10%
0 to 1.6 mm
8× 8× 1 mm
E2A-S08@N02-D@
Non-shielded
2 mm ± 10%
0 to 1.6 mm
12× 12× 1 mm
1,500 Hz
1,000 m/s
Approx. 85 g
Approx. 35 g
Brass-nickel plated or stainless steel
Brass-nickel plated for brass models stainless
steel for steel models
E2A-M12@S02-D@
E2A-S12@S02-D@
Shielded
2
, 10 times each in X, Y and Z directions
M12
5 mm ± 10%
0 to 4 mm
15× 15× 1 mm
800 Hz
E2A-M12@N05-D@
E2A-S12@N05-D@
Non-shielded
7