SO465020 CELDUC, SO465020 Datasheet

RELAY, SOLID STATE, PA, 50A/400V

SO465020

Manufacturer Part Number
SO465020
Description
RELAY, SOLID STATE, PA, 50A/400V
Manufacturer
CELDUC
Datasheet

Specifications of SO465020

Isolation Voltage
4000V
Supply Frequency
60Hz
Svhc
No SVHC (18-Jun-2010)
Control Voltage Dc Max
30V
Control Voltage Dc Min
8V
Load Current
50A
Operating Temperature Max
100°C
Operating
RoHS Compliant
Operating Temperature Range
-40°C To +100°C
Rohs Compliant
Yes
Control Current Max
20mA
Control Current Min
4mA
Control Voltage Ac Max
480V
PRELIMINAIRE / PRELIMINARY
SO4. current range : 35 to 125A
Overvoltage protection by varistor.
Main frequency range : 40 to 70Hz with self adaptation
8-30V supply voltage and Green LED visualization on the input.
0-10V analog input voltage.
resistive loads (linear power law response)
Designed in compliance with EN60947-4-3 (IEC947-4-3)
IP20 protection by flaps on terminals.
Relais statique à entrée analogique permettant un contrôle en puissance
Gamme en courant des SO4 : 35 à 125A
Protection contre les surtensions par varistor intégré
Plage de fréquence réseau :40 à 70 Hz auto-adaptable
Alimentation 8-30V et led verte de visualisation
Entrée analogique 0-10V.
Construit en conformité aux normes EN60947-4-3 (IEC947-4-3)
Protection IP20 par volets sur les bornes.
SSR based phase angle controller with analog control to adjust power on
de charge résistive par une variation en angle de phase
P P P P r r r r o o o o u u u u d d d d t t t t o o o o s s s s e e e e r r r r v v v v e e e e y y y y o o o o u u u u
Dimensions :
et EN60950/VDE0805 (Isolement renforcé)
and EN60950/VDE0805 (Reinforced Insulation)
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
Gradateur angle de phase
Phase angle controller
Control
Entrée
ana.
input
okpac 
Supply
Alim.
Alimentation
analogique
8-30VDC
0-10VDC
Supply
- 1/L1 et 2/T1 peuvent être inversées.
- Le relais doit être monté sur dissipateur thermique.
Entrée
Analog
r
celduc
input
1/L1 and 2/T1 can be swapped.
SSR must be mounted on heatsink
2 connecteurs d'entrée débrochable
à technologie ressort.
Gris: Alimentation
Orange: Entrée analogique 0-10V
Two removable input spring connectors
Grey: Supply
Orange : Analog input 0-10V
Entrée analogique/Analog Input : 0-10V
Application typique / Typical application:
e
Sortie/Output : 200-480VAC 50A
10kW (AC-51) - 230 VAC 50hz
Alimentation/Supply : 8-30V
SO465020
l
S/MON/SO465020/A/22/09/2006
a
i
page 1 / 5F/GB
200-480Vac
s

Related parts for SO465020

SO465020 Summary of contents

Page 1

... Entrée ana. Alim. Control Supply input celduc r S/MON/SO465020/A/22/09/2006 SO465020 Sortie/Output : 200-480VAC 50A Alimentation/Supply : 8-30V Entrée analogique/Analog Input : 0-10V 2 connecteurs d'entrée débrochable à technologie ressort. Gris: Alimentation Orange: Entrée analogique 0-10V Two removable input spring connectors Grey: Supply ...

Page 2

... IEC/EN61000-4-4 (bursts) IEC/EN61000-4-5 (surge) Varistor 510V voir/ see page 6 Thermal resistance junction to case celduc 42290 SORBIERS - FRANCE Service Commercial France Tél. : +33 ( S/MON/SO465020/A/22/09/2006 page 2 / 5F/ 100 µ kΩ ...

Page 3

... Be careful, the repetition of load the surge current decreases the life expectancy of the SSR. celduc 42290 SORBIERS - FRANCE Service Commercial France Tél. : +33 ( S/MON/SO465020/A/22/09/2006 Thermal curves and heatsink choice 0,75K/W 0,55K/W 0,95K/W 1,1K/W 1,5K/W 2,1K/W 6K 100 0 Température ambiante / Ambient temperature (°C) Surcharge de courant non ré ...

Page 4

... Pour les forts courants, le volet doit être enlevé (perte IP20). For high currents, power flap must be removed ( no IP20) celduc 42290 SORBIERS - FRANCE Service Commercial France Tél. : +33 ( S/MON/SO465020/A/022/09/2006 page 4 / 5F/GB Avec cosses/ With ring terminals Power wiring Modèle de tournevis / Couple de serrage Screwdriver type Recommended Torque POZIDRIV 2  ...

Page 5

... WF108110 ( 1,1 K/W) Phase celduc 42290 SORBIERS - FRANCE Service Commercial France Tél. : +33 ( S/MON/SO465020/A/22/09/2006 page 5 / 5F/GB M4x12mm 1,2N.m For heatsink mounting necessary to use thermal grease Thermal pad : 5TH21000 Applications Neutral Load  s E-Mail : celduc-relais@celduc.com Sales Dept. Asia : Tél. +33 ( ...

Related keywords