SP 200 LASCAR, SP 200 Datasheet - Page 3
![Voltage Meter](/photos/21/42/214269/4158389_sml.jpg)
SP 200
Manufacturer Part Number
SP 200
Description
Voltage Meter
Manufacturer
LASCAR
Datasheet
1.SP_200.pdf
(4 pages)
Specifications of SP 200
No. Of Digits / Alpha
3-1/2
Meter Function
DC Voltmeter
Meter Range
0mV To 200mV
Digit Height
9.75mm
Operating Temperature Range
0°C To +50°C
Meter Signal Input
Voltage
Character Size
0.38"
Accuracy
+/- (0.1% Of Input +/- 1 Count)
Backlighting Color
Green
Rohs Compliant
NA
Lead Free Status / RoHS Status
na
SP 200
PIN FUNCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. COM Ground for analogue section of A/D converter.
11. IH
12. IL
Note:
A negative supply is generated internally and mirrors the positive supply. For example: if V+ is +5V, then
the internally generated V- is -5V. When measuring with the input referenced to the same supply rail as
that of the panel meter, then the limitations on the input range are (V- + 1.5V) to (V+ - 1.5V).
CIRCUIT DIAGRAM
%
!
&
V+
NC
GND
DP3
DP2
DP1
R I
RO
BL
Positive power supply to the meter and LED backlighting.
Not connected.
0V power supply connection to the meter.
Connect to GND to display DP3 (199.9).
Connect to GND to display DP2 (19.99).
Connect to GND to display DP1 (1.999).
Reference voltage input for the meter's A/D converter.
Precision reference voltage output. Connect to RI for normal operation.
Connect to GND to switch on the LED backlighting.
It is actively held at 2.8V below V+ and must not be allowed to sink excessive current
(>100 A) by, for instance, connecting to a higher voltage.
Positive measuring input.
IH must be no closer than 1.5V to either the positive or negative supply.
Negative measuring input.
IL must be no closer than 1.5V to the positive supply.
m
www.lascarelectronics.com
3½ Digit Backlit LCD Voltmeter Module
No.: 716 - Page 3 of 4
$
#
"
'