K50LGRY2PQ BANNER ENGINEERING, K50LGRY2PQ Datasheet - Page 4

• Manufacturer Part Number: K50LGRY2PQ
• Description: Programmable Indicator Light
• Manufacturer: BANNER ENGINEERING
• Type: LEDr

Specifications of K50LGRY2PQ

• Mounting Hole Dia: 30mm
• Led Color: Red / Yellow / Green
• Forward Current / Color: 40mA
• Power Connection Type: Terminal
• Supply Voltage: 30V
• Supply Voltage Max: 30VDC
• Current Rating: 75mA
• Connection: 4-Pin Euro QD
• Input: PNP
• Led Function: 3 Color: Choose Green, Red or Yellow ON, Flashing or Alternating
• Lens Color: Multicolor
• Lens Style: Dome
• Primary Type: Pilot Light
• Termination: Quick Connect
• Voltage, Supply: 18-30 VDC
• Multi-color And/or Flashing Frequencies: Three, Four or Five Color Models
• Accessories Available: Cordsets, Brackets and Mounting Solutions
• Color: Multicolor
• Light Functions: Red, Green, Yellow Light
• Mounting Type: 30mm Barrel

Figure 1. Features
EZ-LIGHT
4
Sensor Face
or Push
Button
(D-Series)
Standard
C-Series
E-Series
P/N 126441 rev. C
Models
Job Light (Pick Light) is
entire translucent dome
™
Job Input Active
No Job Input
Job Input Active
No Job Input
Job Input Active
No Job Input
K50 & K80 Series Pick-to-Light Sensors
Sensor Conditions
Hand/pick absent
Hand/pick present
Hand/pick absent
Hand/pick present
Hand/pick absent
Hand/pick present
Hand/pick absent
Hand/pick present
Hand/pick absent
Hand/pick present
Hand/pick absent
Hand/pick present
K50 & K80 Indicator and Output Behavior
The K50 & K80 Pick-to-Light Sensors are suited to many part assembly and bin picking
(pick-to-light) applications. The entire translucent dome provides the green job light or
other indication (depending on model), for high visibility. The solid-state output easily
interfaces to a system controller, which is pre-programmed for a specific sequence of
tasks. Mounted in or near each bin in an assembler’s work station, the sensor job light
signals the assembler:
As the assembler takes a part in sequence, the K50 or K80 senses a hand in the bin and
its output sends a signal to the controller. (For push-button models, the sensing occurs
when the button is pushed. For other models, no action other than reaching for the part is
required for the sensor to detect when a pick is made.)
The system controller then verifies if the correct part was taken and may respond by
turning that job light OFF and activating the job light of the next bin in the sequence.
If multiple parts are to be removed from one bin, the job light may remain ON until
the appropriate number of signals is returned to the controller. If an incorrect part is
selected, the control system may be wired to signal an alarm for the assembler and/or a
supervisor, or it may be programmed to interpret the action as a call for parts.
The job light system results in increased efficiency (due to simplified job training),
increased quality control (no skipped components), and reduced rework and inspections.
It speeds the resumption of work after breaks and other distractions and is ideal for
multilingual workplaces where communication is an issue.
The fixed-field and retroreflective-mode models require no interaction to operate, and so
eliminate the hand, wrist, and arm stresses associated with mechanical push buttons.
All models are immune to EMI, RFI, and ambient light interference. The polycarbonate
and nylon housing is capable of absorbing high impact (even at low temperatures) and
is resistant to abrasion and to damage by most chemicals. Its domed construction allows
most dust and debris to slide easily off the sensor housing, simplifying maintenance. The
30 mm threaded base on all models provides easy mounting. Indicator behavior is shown
in the table below.
• Which bins contain items to be picked in a given operation; and
• In what order they should be picked.
Job Light
ON Green
ON Green
ON Green
ON Green
ON Green
OFF
OFF
—
—
—
Overview
Banner Engineering Corp. • Minneapolis, MN U.S.A.
Alternate Indicator
www.bannerengineering.com • Tel: [phone]
ON Red
ON Red
ON Red
OFF
—
—
—
—
—
—
—
—
Output Signal Status
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
ON