110861010 WALDMANN, 110861010 Datasheet - Page 9

• Manufacturer Part Number: 110861010
• Description: LUMINAIRE, HAND, W/PROOF, HLWC111
• Manufacturer: WALDMANN

Specifications of 110861010

• Supply Voltage: 230V
• Base Type: Fluo 11W
• Power Rating: 11W
• Length: 265mm
• External Length / Height: 265mm
• External Width: 50mm
• Ip/nema Rating: IP 67
• Lens Colour: Clear
• Supply: RoHS Compliant
• Lamp Base Type: Fluo 11W
• Rohs Compliant: No
• Light Source: Fluorescent

Instructions for use HLC/HLCE/HLWC/HLWCE
Instructions for use HLC/HLCE/HLWC/HLWCE
Operation
Lights without switch
The standard equipment of the
light does not include a switch of its
own. Unplug the unit to discon-
nect it from the mains.
Lights with switch
The light is switched on/off via the
rocker switch on the light handle.
Positioning
During use, the light is held by
its handle. It may be deposited
on a surface or placed upright or
suspended by means of the at-
tached strap.
The plug connector and plug ballast
unit must be positioned in such a
way that they do not represent a
risk. When using plug ballast units,
please take note of the protection
type (see notes on plug ballast
unit).
Make sure that the cable is laid
in such a way that it cannot be
damaged.
Maintenance and repairs
Disconnect the light from the
mains before carrying out any
maintenance or repair work!This
work may only be carried out by a
trained electrician!
regularly for damage. A defective
mains cable may only be replaced
by the manufacturer!
Only parts approved by the manu-
facturer may be used as spare
parts.
The mains line must be checked
GB
GB
Replacing the lamp
(see also Fig. 3 on page 3)
a) Disconnect the light (pull mains
b) Press the two locking pins for
c) Pull off the protective tube (B):
d) Pull the lamp out of the lamp
e) Insert new lamp into the lamp
f) Slide protective tube on the
Note:The water-proof lights (HLWC
and HLWCE) do not contain any
locking pins. The protective tube
can be pulled off directly from
the light handle using a little bit
of force.
Caution! Use only lamp types ap-
proved by the manufacturer (see
“Technical data”).
plug).
the protective tube together
(A).
handle (C).
socket.
handle till the two locking pins
engage.
Care
Note: Cleaning the transparent
shade regularly guarantees a higher
luminous efficiency.
Please use a cloth impregnated
with a suitable household clean-
ing agent to clean the light com-
ponents.
Please ensure that the cleaning
agent used does not damage
paints and plastics.
Disposal
The light must be disposed of in
accordance with the local regula-
tions when it has reached the end
of its useful life.
Defective fluorescent lamps must
be disposed of as special waste.
Waldmann
Waldmann
Waldmann
Waldmann
Waldmann
Waldmann
9