S4111-16R HAMAMATSU, S4111-16R Datasheet - Page 4

• Manufacturer Part Number: S4111-16R
• Description: PHOTODIODE, 960NM, 18-DIP
• Manufacturer: HAMAMATSU

Specifications of S4111-16R

• Wavelength Typ: 960nm
• Sensitivity: 0.58A/W
• Dark Current: 0.025nA
• Diode Case Style: DIP
• No. Of Pins: 18
• Operating Temperature Range: -20°C To +60°C
• External Depth: 2.2mm
• External Length / Height: 22.86mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.
Si photodiode array
nected to each channel to read the output in real time. The output of
an operational amplifier is of low impedance and thus can be easily
multiplexed.
junction capacitance of each channel, which is proportional to the
incident light intensity, can be read out in sequence by a multiplexer.
With this method, reverse voltage must be applied to the
photodiodes, so S4111 and S4114 series are suitable. One amplifier
is sufficient but care should be taken regarding noise, dynamic
range, etc.
Operating circuits
In the most generally used circuit, operational amplifiers are con-
In the charge storage readout method, the charge stored in the
PHOTODIODE ARRAY
BIAS
PHOTODIODE ARRAY
S4111/S4114 series
MULTIPLEXER
ADDRESS
MULTIPLEXER
Cat. No. KMPD1002E06
Aug. 2006 DN