ZHX1201MB115THTR Zilog, ZHX1201MB115THTR Datasheet - Page 7
![Fiber Optic Transmitters, Receivers, Transceivers](/photos/40/16/401686/zhx1201mb115thtr_8smd_sml.jpg)
ZHX1201MB115THTR
Manufacturer Part Number
ZHX1201MB115THTR
Description
Fiber Optic Transmitters, Receivers, Transceivers
Manufacturer
Zilog
Datasheet
1.ZHX1201MB115TH.pdf
(15 pages)
Specifications of ZHX1201MB115THTR
Product
Transceiver
Data Rate
115.2 Kbps
Wavelength
870 nm
Maximum Rise Time
100 ns
Maximum Fall Time
100 ns
Pulse Width Distortion
5 us
Operating Supply Voltage
2.4 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 30 C
Package / Case
UltraSlim
Idle Current, Typ @ 25° C
100µA
Link Range, Low Power
20cm
Operating Temperature
-30°C ~ 85°C
Orientation
Side View
Shutdown
*
Size
8mm x 3mm x 2.5mm
Standards
IrPHY 1.4
Supply Voltage
2.4 V ~ 3.6 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
PS015207-0104
GND Ground
SD Shutdown
RxD Receive Data
TxD Transmit Data
LEDA LED Driver
TAB
Shield Connection
(Power)
Connect to ground of the power supply. A solid ground plane is recommended for
proper operation.
(Input, active high)
This input is used to place the IC into a shutdown mode.
TxD needs to be driven low to achieve low shutdown current and held low during
the transition from shutdown to active to ensure that the circuitry is properly set to
communicate.
(Output, active low)
This output provides received serial data. It is a tri-state, slew rate controlled
CMOS output (tri-stated during shutdown) driver capable of driving a standard
CMOS or LS series TTL load. No external resistor is required.
(Input, active high)
This CMOS input is used to transmit serial data and has an internal pull-down
resistor that is disabled (open-circuited) during shutdown. With integrated digital
AC coupling, no external components are required for input signals between GND
and V
(Power)
This output is internally connected to the LED anode and contains an internal
current source. The voltage range on this pad is 2.4–4.2 volts.
The shield tab must be soldered to ground for proper operation.
CC
.
P
R
E
L
I
M
I
N
A
SIR UltraSlim Transceiver (IrMC)
R
Y
ZHX1201
3