SN3C1-124 AVX Corporation, SN3C1-124 Datasheet - Page 14

• Manufacturer Part Number: SN3C1-124
• Manufacturer: AVX Corporation

Specifications of SN3C1-124

• Mounting Style: Through Hole
• Operating Temp Range: -55C to 125C
• Voltage Rating Max: 50VAC/50VDC
• Lead Free Status / RoHS Status: Not Compliant

Solder-In Style High Temp EMI Filters
YS/YR Series – .165 Dia. – Circuits Available – C & L
SPECIFICATIONS
10. Supplied with 60/40 solder preform for
11. Insertion Loss for the “C” and “L” circuits
12
1. Plating: Gold standard – Silver available
2. Material:
3. Operating Temperature Range:
4. Insulation Resistance:
5. Dielectric Withstanding Voltage (DWV):
6. DC Resistance (DCR): .01 ohm,
7. Dissipation Factor (DF): 3% maximum
8. Rated DC Current: 5 Amps, maximum
9. Maximum Installation Temperature:
Case: Cold rolled steel
Leads: Alloy 52 steel
-55°C to +125°C
easy installation
are equivalent due to the saturation
characteristic of the ferrite bead element
at full rated current. At lower currents the
“L” becomes much more effective.
R-level designs:
Class B, Class S designs:
maximum
300°C
At 25°C: 1,000 megohm-microfarad
At 125°C: 100 megohm-microfarad
2.0 times rated DC voltage
2.5 times rated DC voltage
min., or 100,000 megohms
min., whichever is less
min., or 10,000 megohms
min., whichever is less
APPLICATIONS
The YS series provides increased filtering
in the MICROWAVE frequency spectrum
from 1 MHz through 10 GHz. Previously
unavailable in the industry as a solder-in
device, this unique design offers higher
values of capacitance than were previ-
ously available. Designed to be soldered
into a package, bracket or bulkhead (and
maintain hermeticity), it is ideal for high
impedance circuits where large capaci-
tance values are not practical. In the “L”
CHARACTERISTICS
• Meets or exceeds the applicable portions
• High temperature construction with-
• Features rugged monolithic discoidal
of MIL-F-28861/15. See QPL listings.
stands 300°C installation temperatures.
capacitor construction.
millimeters (inches)
(See Note 4)
Diagram
Circuit
0.05 (.002)
0.13 (.005)
0.64 (.025)
0.8
0.81 (.032) 19.05 (.750)
3.81 (.150)
C
L
YS1, YR1
(.03)
C
Dimensions
±.005
.250
.150
16.51 (.650)
A
4.19 (.165)
5.08 (.200)
6.35 (.250)
—
±.005
±.005
.165
.200
Ref.
.750
.650
—
B
GLASS
SEAL
END
STANDARD CONFIGURATION
±.002
.032
Notes:
1. Outline drawing shows stan-
2. MIL-F-28861/15
CIRCUIT DIAGRAMS
dard YS configuration. Also
available with glass seal at
the opposite end, YR reverse
configuration.
equivalent to standard YS
configuration. Style B is
reverse YR configuration.
YS2
section version an internal ferrite bead
element provides both inductance and
series resistance (lossy characteristic)
which improves insertion loss and pro-
vides superior transient performance.
Alternate lead lengths or special capaci-
tance values may be ordered.
Custom packages or bracket assemblies
utilizing this feedthru can be furnished to
your specifications.
• Glass hermetic seal on one end with
• High purity gold plating provides excel-
±.005
.025
(See Note 3)
epoxy seal on the opposite end.
lent solderability or compatibility with
thermal and ultrasonic wire bonding.
FLANGE
END
B
style
A
A
FLANGE
END
GLASS
SEAL
END
3. For YS2 or YR2 L-Section
4. Metric equivalent dimensions
MIL-F-28861/15 (See Note 2)
001 through 004
005 through 008
Filters inductor always posi-
tioned at epoxy-filled end.
given for information only.
(2 PLC)
Dash No.
±.03
.25
GLASS SEAL
YR2
Config.
A
B