SN3C1-124 AVX Corporation, SN3C1-124 Datasheet - Page 19

• Manufacturer Part Number: SN3C1-124
• Manufacturer: AVX Corporation

Specifications of SN3C1-124

• Mounting Style: Through Hole
• Operating Temp Range: -55C to 125C
• Voltage Rating Max: 50VAC/50VDC
• Lead Free Status / RoHS Status: Not Compliant

Solder-In Style High Temp EMI Filters
WS/WR Series – .400 Dia. – Circuits Available – C & L
SPECIFICATIONS
10. Supplied with 60/40 solder preform for
11. Insertion Loss for the “C” and “L” circuits
1. Plating: Gold standard – Silver available
2. Material:
3. Operating Temperature Range:
4. Insulation Resistance:
5. Dielectric Withstanding Voltage (DWV):
6. DC Resistance (DCR): .01 ohm,
7. Dissipation Factor (DF): 3% maximum
8. Rated DC Current: 15 Amps, maximum
9. Maximum Installation Temperature:
Case: Cold rolled steel
Leads: Alloy 52 steel
-55°C to +125°C
easy installation
are equivalent due to the saturation
characteristic of the ferrite bead element
at full rated current. At lower currents the
“L” becomes much more effective.
R-level designs:
Class B, Class S designs:
maximum
300°C
At 25°C: 1,000 megohm-microfarad
At 125°C: 100 megohm-microfarad
2.0 times rated DC voltage
2.5 times rated DC voltage
min., or 100,000 megohms
min., whichever is less
min., or 10,000 megohms
min., whichever is less
APPLICATIONS
The WS series expands greatly upon the
XS and YS offerings by providing
increased filtering in the HF through
MICROWAVE frequency spectrum from
500 KHz up to 10 GHz. The larger diam-
eter of the WS series means even higher
values of capacitance, a rated DC current
of 15 Amps, plus 125 VAC/400 Hz rat-
ings are available. Designed to be sol-
dered into a package, bracket or bulk-
head (and maintain hermeticity), it is ideal
for low to medium impedance circuits
where large amounts of capacitance to
CHARACTERISTICS
• Meets or exceeds the applicable portions
• High temperature construction with-
• Features rugged monolithic discoidal
of MIL-F-28861/13. See QPL listings.
stands 300°C installation temperatures.
capacitor construction.
millimeters (inches)
(See Note 4)
Diagram
Circuit
0.05 (.002)
0.13 (.005)
0.64 (.025) 10.16 (.400)
0.8
1.27 (.050) 17.78 (.700)
5.08 (.200) 20.32 (.800)
C
L
(.03)
Dimensions
±.005
.300
.200
11.43 (.450)
A
6.35 (.250)
7.62 (.300)
±.005
±.005
WS1, WR1
.400
.450
Ref.
.800
.700
B
C
STANDARD CONFIGURATION
±.002
.050
Notes:
1. Outline drawing shows stan-
2. MIL-F-28861/13 configuration
CIRCUIT DIAGRAMS
dard WS configuration. Also
available with glass seal at
the opposite end, WR reverse
configuration.
“A” is equivalent to standard
WS configuration. “B” is
reverse WR configuration.
ground can be tolerated. In the “L”
section version an internal ferrite bead
element provides both inductance and
series resistance (lossy characteristic)
which improves insertion loss and pro-
vides superior transient performance.
Alternate lead lengths or special capaci-
tance values may be ordered.
Custom packages or bracket assemblies
utilizing this feedthru can be furnished to
your specifications.
• Glass hermetic seal on one end with
• High purity gold plating provides excel-
±.005
.025
epoxy seal on the opposite end.
lent solderability or compatibility with
thermal and ultrasonic wire bonding.
REF
GLASS
SEAL
END
B
WS2, WR2 (See Note 3)
A
3. For WS2 or WR2 L-Section
4. Metric equivalent dimensions
MIL-F-28861/13 (See Note 2)
001 through 008
009 through 016
(2 PLC)
Filters inductor always posi-
tioned at epoxy-filled end.
given for information only.
Dash No.
±.03
.25
GLASS SEAL
FLANGE
END
Config.
A
B
17