SN3C1-124 AVX Corporation, SN3C1-124 Datasheet - Page 37

• Manufacturer Part Number: SN3C1-124
• Manufacturer: AVX Corporation

Specifications of SN3C1-124

• Mounting Style: Through Hole
• Operating Temp Range: -55C to 125C
• Voltage Rating Max: 50VAC/50VDC
• Lead Free Status / RoHS Status: Not Compliant

Cylindrical Style EMI Filters
GK Series – .375/.410 Dia.
Hermetically Sealed – Circuits Available – C, L,
CHARACTERISTICS
• .410 Dia. version (HK) meets or exceeds the applicable
• Glass hermetic seal on both ends.
• Wound toroidal inductor used in current ratings up through
SPECIFICATIONS
1. Case/Terminal Plating:
2. Material:
3. Operating Temperature Range:
4. Electrical Characteristics:
requirements of MIL-F-28861/2,/3,/4,/5. See QPL listing.
5 Amps. Ferrite bead inductor used in 10 and 15 Amp
designs.
Case: Brass standard – Steel available
End Seal: Mild steel
Terminals: Nickel-iron alloy
-55°C to +125°C
A. Rated Voltage and Current: See chart
B. Insulation Resistance:
At 25°C: 1,000 megohm-microfarad
At 125°C: 100 megohm-microfarad
Electro-tin standard –
Silver or gold available
min., or 50,000 megohms
min., whichever is less, at
the rated DC voltage
min., or 5,000 megohms
min., whichever is less
APPLICATIONS
The GK series offers effective filtering from
30 KHz to 10 GHz. Glass sealed for
hermeticity, this series is impervious to
high moisture, solvents, or other severe
environmental
encountered in military applications. It
is designed for bulkhead mounting in
a slotted hole with nut and lockwasher
supplied.
The “L” and “T” configurations are designed
to provide effective attenuation over a wide
range of circuit impedances. For current
ratings under 10 Amps toroidal wound
NOTE: Schematic to indicate location of
inductor (standard or reverse) for GK2
L-Section Filters.
5. Marking:
Standard Marking: AVX, AVX part num-
ber, rated current, voltage, lot code,
schematic
C. Dielectric Withstanding Voltage
D. Capacitance: Total capacitance listed
in chart for each filter type is “guar-
anteed minimum value” (GMV)
(DWV):
R-level designs:
Class B, Class S designs:
2.0 times rated DC voltage
2.5 times rated DC voltage
conditions
• High DC current rating: 15 Amps.
• High capacitance values available.
commonly
inductor elements offer increased filter
performance and protection against circuit
transients. Data showing the actual
inductance versus various levels of DC or
AC bias current are available as well as the
attenuation in any combination of source
and load impedances.
Alternate lead configurations or special
capacitance/inductance values may be
ordered.
Custom packages or filter arrays utilizing
the GK series can be furnished.
See Reliability Codes section for definition of
Reliability Level marking. See How to Order
section for part number construction.
6. Installation:
π
A. Mounting Torque: 44 oz-in. ± 4 oz-in.
B. Refer to “Installation, Handling,
, T
Hardware Options” section of the
catalog.
35