EFM32-TG822F32-SK Energy Micro, EFM32-TG822F32-SK Datasheet - Page 47

• Manufacturer Part Number: EFM32-TG822F32-SK
• Description: MCU, MPU & DSP Development Tools TG822 Sample Kit
• Manufacturer: Energy Micro

Specifications of EFM32-TG822F32-SK

• Processor To Be Evaluated: EFM32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2012-02-27 - EFM32TG822FXX - d0052_Rev0.95
Alternate
Functionality
ACMP1_CH5
ACMP1_CH6
ACMP1_CH7
ACMP1_O
ADC0_CH4
ADC0_CH5
ADC0_CH6
ADC0_CH7
CMU_CLK0
CMU_CLK1
DAC0_N1 /
OPAMP_N1
DAC0_OUT0 /
OPAMP_OUT0
DAC0_OUT1ALT /
OPAMP_OUT1ALT
DAC0_OUT2 /
OPAMP_OUT2
DAC0_P0 /
OPAMP_P0
DAC0_P1 /
OPAMP_P1
DAC0_P2 /
OPAMP_P2
DBG_SWCLK
DBG_SWDIO
DBG_SWO
GPIO_EM4WU0
GPIO_EM4WU1
HFXTAL_N
HFXTAL_P
I2C0_SCL
I2C0_SDA
LCD_BCAP_N
LCD_BCAP_P
LCD_BEXT
PC13
PC14
PC15
PF2
PD4
PD5
PD6
PD7
PA2
PA1
PD7
PB11
PD5
PC4
PD6
PD4
PF0
PF1
PF2
PA0
PE13
PB14
PB13
PA1
PA0
PA13
PA12
PA14
0
PC13
PF0
PF1
PC15
PD7
PD6
1
PD7
PD7
PE12
PC14
2
LOCATION
PC15
3
4
...the world's most energy friendly microcontrollers
PF1
PF0
47
5
PE13
PE12
6
Analog comparator ACMP1, channel 5.
Analog comparator ACMP1, channel 6.
Analog comparator ACMP1, channel 7.
Analog comparator ACMP1, digital output.
Analog to digital converter ADC0, input channel number 4.
Analog to digital converter ADC0, input channel number 5.
Analog to digital converter ADC0, input channel number 6.
Analog to digital converter ADC0, input channel number 7.
Clock Management Unit, clock output number 0.
Clock Management Unit, clock output number 1.
Operational Amplifier 1 external negative input.
Digital to Analog Converter DAC0_OUT0 /
OPAMP output channel number 0.
Digital to Analog Converter DAC0_OUT1ALT /
OPAMP alternative output for channel 1.
Digital to Analog Converter DAC0_OUT2 /
OPAMP output channel number 2.
Operational Amplifier 0 external positive input.
Operational Amplifier 1 external positive input.
Operational Amplifier 2 external positive input.
Debug-interface Serial Wire clock input.
Note that this function is enabled to pin out of reset, and has
a built-in pull down.
Debug-interface Serial Wire data input / output.
Note that this function is enabled to pin out of reset, and has
a built-in pull up.
Debug-interface Serial Wire viewer Output.
Note that this function is not enabled after reset, and must be
enabled by software to be used.
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
High Frequency Crystal (4 - 32 MHz) negative pin. Also used
as external optional clock input pin.
High Frequency Crystal (4 - 32 MHz) positive pin.
I2C0 Serial Clock Line input / output.
I2C0 Serial Data input / output.
LCD voltage booster (optional), boost capacitor, negative pin.
If using the LCD voltage booster, connect a 22 nF capacitor
between LCD_BCAP_N and LCD_BCAP_P.
LCD voltage booster (optional), boost capacitor, positive pin.
If using the LCD voltage booster, connect a 22 nF capacitor
between LCD_BCAP_N and LCD_BCAP_P.
LCD voltage booster (optional), boost output. If using the
LCD voltage booster, connect a 1 uF capacitor between this
pin and VSS.
An external LCD voltage may also be applied to this pin if the
booster is not enabled.
Description
www.energymicro.com