XLT64PT1 Microchip Technology, XLT64PT1 Datasheet - Page 6

• Manufacturer Part Number: XLT64PT1
• Description: Microcontroller Modules & Accessories 64 LD Pl Thin Quad Flatpack TRANS Sckt
• Manufacturer: Microchip Technology

Specifications of XLT64PT1

• Product: Microcontroller Accessories
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MPLAB
TRANSITION SOCKET
APPLICATIONS – COMMENTS
AND SUGGESTIONS
Attention to component placement should be consid-
ered in mating the adapter sockets to the SOIC/SSOP
headers. If visual alignment is difficult in your applica-
tion, C-shaped end brackets have been included to aid
in header-to-adapter socket alignment. Clip the
brackets onto the SOIC/SSOP header.
The placement of via’s around the Surface Mount
Technology (SMT) layout area should be examined.
Via’s immediately adjacent to the end of a SMT pad
may inadvertently come into contact with the header
leads. Via’s should be placed along the centerline of
the SMT pad to lessen the chance of pin-to-pin shorts
while soldering.
The SOIC header is designed for SOIC body width of
0.300-inch, the adapter leads should be cut to fit the
0.150-inch and 0.208-inch SOIC body widths.
For information on packaging dimensions, please refer
to DS00049.
PDIP TRANSITION SOCKET
A PDIP transition socket and associated hardware is
shown in Figure 1.
FIGURE 1: PDIP TRANSITION SOCKET
The PDIP transition socket is a 0.300-inch Male to
0.600-inch Female adapter socket.
Microchip offers the following PDIP transition socket:
• XLT28XP: One 28-lead PDIP adapter socket and
See the drawings in this section for layout dimensions.
DS51194K-page 2
two 28-lead gold stand-offs
0.300-inch Male to 0.600-inch Female Adapter Socket
Gold Standoffs/Adapters
(PDIP Transition Socket)
®
ICE 2000/4000
Cable to Processor Module
PDIP Device Adapter
Target/Application Board
XLT28XP
28-lead DIP 0.300-inch Male to 0.600-inch Female
Adapter Socket
TOP
VIEW
SIDE
VIEW
FRONT/
REAR
VIEW
0.300"
1.400"
 2004 Microchip Technology Inc.
0.600"
0.100"
0.700"