AD6645ASVZ-105 Analog Devices Inc, AD6645ASVZ-105 Datasheet - Page 16

• Manufacturer Part Number: AD6645ASVZ-105
• Description: 14 Bit 105 MSPS ADC PB Free
• Manufacturer: Analog Devices Inc

Specifications of AD6645ASVZ-105

• Design Resources: Low Jitter Sampling Clock Generator for High Performance ADCs Using AD9958/9858 and AD9515 (CN0109)
• Number Of Bits: 14
• Sampling Rate (per Second): 105M
• Data Interface: Parallel
• Number Of Converters: 4
• Power Dissipation (max): 1.75W
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -10°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 52-TQFP, 52-VQFP
• Number Of Elements: 1
• Resolution: 14Bit
• Architecture: Pipelined
• Sample Rate: 105MSPS
• Input Polarity: Unipolar
• Input Type: Voltage
• Rated Input Volt: ±1.1V
• Differential Input: Yes
• Power Supply Requirement: Single
• Single Supply Voltage (typ): 5V
• Single Supply Voltage (min): 4.75V
• Single Supply Voltage (max): 5.25V
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Differential Linearity Error: -1LSB/1.5LSB
• Integral Nonlinearity Error: ±1.5LSB(Typ)
• Operating Temp Range: -10C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 52
• Package Type: TQFP EP
• Input Signal Type: Differential
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AD6645
Spurious-Free Dynamic Range (SFDR)
The ratio of the rms signal amplitude to the rms value of the
peak spurious spectral component. The peak spurious component
may or may not be a harmonic. May be reported in dBc (that is,
degrades as signal level is lowered) or dBFS (always related back
to converter full scale).
Two-Tone Intermodulation Distortion Rejection
The ratio of the rms value of either input tone to the rms value
of the worst third-order intermodulation product, reported in dBc.
Rev. D | Page 16 of 24
Two-Tone SFDR
The ratio of the rms value of either input tone to the rms value
of the peak spurious component. The peak spurious component
may or may not be an IMD product, and may be reported in
dBc (that is, degrades as signal level is lowered) or in dBFS
(always related back to converter full scale).
Worst Other Spur
The ratio of the rms signal amplitude to the rms value of the
worst spurious component (excluding the second and third
harmonics), reported in dBc.