DSPIC33FJ32MC202-E/MM Microchip Technology, DSPIC33FJ32MC202-E/MM Datasheet - Page 213

• Manufacturer Part Number: DSPIC33FJ32MC202-E/MM
• Description: 16-bit DSC, 32KB Flash,Motor,40 MIPS,nanoWatt 28 QFN-S 6x6mm TUBE
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32MC202-E/MM

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-QFN
• Package: 28QFN-S EP
• Device Core: dsPIC
• Family Name: dSPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 6-chx10-bit|6-chx12-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TABLE 21-2:
© 2011 Microchip Technology Inc.
WDTPOST<3:0>
POSCMD<1:0>
FCKSM<1:0>
OSCIOFNC
IOL1WAY
FWDTEN
WDTPRE
PWMPIN
Bit Field
WINDIS
dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304
dsPIC33F CONFIGURATION BITS DESCRIPTION (CONTINUED)
Register
FOSC
FOSC
FOSC
FOSC
FWDT
FWDT
FWDT
FWDT
FPOR
Immediate Clock Switching Mode bits
Immediate Peripheral pin select configuration
Immediate OSC2 Pin Function bit (except in XT and HS modes)
Immediate Primary Oscillator Mode Select bits
Immediate Watchdog Timer Enable bit
Immediate Watchdog Timer Window Enable bit
Immediate Watchdog Timer Prescaler bit
Immediate Watchdog Timer Postscaler bits
Immediate Motor Control PWM Module Pin Mode bit
Effect
RTSP
1x = Clock switching is disabled, Fail-Safe Clock Monitor is disabled
01 = Clock switching is enabled, Fail-Safe Clock Monitor is disabled
00 = Clock switching is enabled, Fail-Safe Clock Monitor is enabled
1 = Allow only one reconfiguration
0 = Allow multiple reconfigurations
1 = OSC2 is clock output
0 = OSC2 is general purpose digital I/O pin
11 = Primary oscillator disabled
10 = HS Crystal Oscillator mode
01 = XT Crystal Oscillator mode
00 = EC (External Clock) mode
1 = Watchdog Timer always enabled (LPRC oscillator cannot be disabled.
0 = Watchdog Timer enabled/disabled by user software (LPRC can be dis-
1 = Watchdog Timer in Non-Window mode
0 = Watchdog Timer in Window mode
1 = 1:128
0 = 1:32
1111 = 1:32,768
1110 = 1:16,384
•
•
•
0001 = 1:2
0000 = 1:1
1 = PWM module pins controlled by PORT register at device Reset
0 = PWM module pins controlled by PWM module at device Reset
Clearing the SWDTEN bit in the RCON register will have no effect.)
abled by clearing the SWDTEN bit in the RCON register)
(tri-stated)
(configured as output pins)
Description
DS70283H-page 213