CVM1-PA208 Omron, CVM1-PA208 Datasheet - Page 54

• Manufacturer Part Number: CVM1-PA208
• Description: CV/CVM1 POWER SUPPLY, AC
• Manufacturer: Omron

Specifications of CVM1-PA208

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

38
Rack Components
10. Host Link Connector
6. Initialize Button
7. Peripheral Connector
8. Communications DIP Switch
9. Host Link Communications Selector
Initializes changes in duplex system operation. For example, press this but-
ton when you want to switch from simplex mode to duplex mode after replac-
ing a CPU Unit in which an error occurred.
This connector is used to connect a Programming Device such as a comput-
er running SSS or a Programming Console. The baud rate is set on the
Communications DIP Switch. (See below.)
Sets the CPU Unit’s communications specifications.
Set the switch to the communications specification desired for the host link
connector.
This connector is used for RS-232 or RS-422 communications. Select
RS-232 or RS-422 communications with the host link communications se-
lector (9.). The PERIPHERAL/HOST LINK indicators indicate whether the
left or right CPU Unit is connected.
1, 2
3
4
5
6
Pin(s)
,
---
OFF, OFF Programming Device communications: 50,000 bps
ON, OFF
OFF, ON
ON, ON
OFF
ON
OFF
ON
OFF
---
OFF
ON
Position
Pins 1 and 2 set the baud rate for the peripheral connector.
Programming Device communications: 19,200 bps
Programming Device communications: 9,600 bps
Programming Device communications: 4,800 bps
Communicate via Host Link communications.
Communicate with PT (Programmable Terminal) via NT
Link communications.
Host link communications governed by PC Setup.
(Effective only when pin 3 is OFF.)
Initializes host link communications specifications to the
following settings when connecting a personal computer.
(Effective only when pin 3 is OFF.)
Baud rate: 9,600 bps
Unit number 00
Even parity
7-bit data
2 stop bits
Not used. (Leave this pin set to OFF.)
Sets the terminating resistance for RS-422 communica-
tions. (This setting is not used for RS-232 communica-
tions. Leave OFF when using RS-232 communications.)
Terminating resistance OFF.
Terminating resistance ON.
Function
Section
2-4