327913-000 Tyco Electronics, 327913-000 Datasheet - Page 415

• Manufacturer Part Number: 327913-000
• Description: Connector Accessories Hexa Shield Adapter Aluminum Alloy Olive Drab
• Manufacturer: Tyco Electronics
• Type: Hexa Shield Adapterr

Table A. CWT Series
(125°C [257°F] rated)
*See Table G on page 8-47 for lead description.
Note: The CWT series is suitable for applications using low-temperature wires (typically rated at 85°C [185°F] to 125°C [257°F]) with bare copper or tin plating.
Table B. SO63 Series
*See Table G on page 8-47 for lead description. Color of wire lead is denoted by the last two digits of the part number as follows:
The SO63 series is immersion resistant, features the Raychem BiAlloy temperature indication system, and meets the performance requirements of
SAE-AS83519 (formerly MIL-S-83519) .
Catalog 1654025
Revised 12-04
www.tycoelectronics.com
90 = White with a black stripe
1.95 [0.075]
Jacket OD
2.7 [0.105]
4.3 [0.170]
6.0 [0.235]
7.0 [0.275]
Max.
Cable OD
10.7 [.420]
13.0 [.510]
1.7 [.065]
1.95 [.075]
2.7 [.105]
4.5 [.180]
6.0 [.235]
7.0 [.275]
8.7 [.340]
OD Max.
Jacket
0.90 [.035]
1.40 [.055]
2.15 [.085]
3.30 [.130]
4.30 [.170]
Shield OD
Min.
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Preinstalled
SO63-1-00
SO63-2-00
SO63-3-00
SO63-4-00
SO63-5-00
9 = White
Cable OD
Lead
No
Shield Termination
BiAlloy Temperature
Indication System
This system greatly enhances the reliability and repeatabil-
ity of SO63 series terminators while reducing installed cost.
The heat-shrinkable thermoplastic sleeve contains a pre-
cisely engineered, fluxed solder band that is visible through
the sleeve. The band provides exactly the amount of solder
and flux required to terminate the ground lead to the cable
shield. Encircling the band is a small temperature indicator
ring. This ring melts only when the surfaces to be joined
have reached the correct soldering temperature, thus
ensuring a properly soldered connection. Process control is
built into each sleeve.
SolderSleeve Shield Terminators
0 = Black
SO63-1-55-20-90
SO63-2-55-20-90
SO63-3-55-20-90
SO63-4-55-20-90
SO63-5-55-20-90
20 AWG
0.9 [.035]
1.1 [.043]
1.5 [.059]
2.0 [.079]
3.3 [.130]
3.3 [.130]
4.5 [.177]
4.5 [.177]
7.0 [.276]
OD Min.
Shield
6 = Blue (24 AWG only)
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
SO63-1-55-22-90
SO63-2-55-22-90
SO63-3-55-22-90
SO63-4-55-22-90
SO63-5-55-22-90
22 AWG
5 = Green (20, 22, 24 AWG)
Preinstalled Lead Option*
(Continued)
Part Nos.
SO63-2-55-24-90
SO63-1-55-24-90
SO63-3-55-24-90
SO63-4-55-24-90
SO63-5-55-24-90
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
24 AWG
No Preinstalled
CWT-3801
CWT-3802
CWT-11
CWT-13
CWT-3
CWT-5
CWT-6
CWT-7
CWT-9
Lead
SO63-1-55-26-90
SO63-2-55-26-90
SO63-3-55-26-90
SO63-4-55-26-90
SO63-5-55-26-90
Part Nos.
26 AWG
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
(22AWG/0.38 mm
With Preinstalled Lead
Nickel Plated
CWT-11-W122-5
CWT-13-W122-5
SO63-1-01 SO63-1-9030
SO63-2-01 SO63-2-9030
SO63-3-01 SO63-3-9030
SO63-4-01 SO63-4-9030
SO63-5-01 SO63-5-9030
CWT-3-W122-5
CWT-5-W122-5
CWT-6-W122-5
CWT-7-W122-5
CWT-9-W122-5
Braid Strap
—
—
2
green)
Tin Plated
8-45
8