05400792464 3M Interconnect Solutions, 05400792464 Datasheet - Page 22

• Manufacturer Part Number: 05400792464
• Description: Conn SC Coupler Single Mode Duplex PL/PL Crimp ST Panel Mount
• Manufacturer: 3M Interconnect Solutions
• Type: SC Couplerr

Specifications of 05400792464

• Gender: PL/PL
• Mounting: Panel Mount
• Body Orientation: Straight
• Mode: Single Mode
• Ferrule Material: Zirconia Ceramic

SECTION I
Connector Assembly and Installation
1.
2.
Note: Carefully follow safety, health and disposal information on
3.
CONNECTOR ASSEMBLY
CONNECTOR COUPLING CLEANING
SC CONNECTOR - STANDARD DENSITY MATING
Once the SC connector has been mounted and polished, the
housing can be installed onto the body.
A. Standard Density Applications
B. High Density Applications
Only one connection should be made at a time and the dust caps
should not be removed until immediately prior to mating.
A. Clean the ceramic ferrule of the connector with an isopropyl
B. Insert an isopropyl alcohol dampened pipe cleaner into the
Installation
A. Hold the connector by the housing. Align the key on the
B. Uncap, clean and install the second connector as described
Removal
A. To release the connector from the coupling, pull back on the
B. Cover connector and coupling ends with dust caps when not
While holding the connector firmly by the boot, align the
chamfers on both the connector and housing and snap into
place (Fig. I1). A positive click will be heard when the housing
is fully engaged.
This application does not require the housing to be placed onto
the connector body. The high density coupling is used without
the sliding housing.
alcohol dampened lint-free cloth (Fig. I2) and immediately blow
with compressed air.
container label or Material Safety Data Sheet for isopropyl
alcohol being used.
coupling to remove any foreign particles (Fig. I3). Blow with
compressed air.
connector housing with the slot of the coupling (Fig. I4) and
push into place with a positive click. (The white line or slot in
the housing will not be visible when fully latched).
above.
connector housing.
being used.
22
Fig. I1
Fig. I2
Fig. I3
Fig. I4