D2D2000 Omron, D2D2000 Datasheet
D2D2000
Related parts for D2D2000
D2D2000 Summary of contents
Page 1
... D2D Power Switch with Minimum Contact Gap mm. • Minimum contact gap (standard models), needed in general power switches, is provided. • Mechanism with double return spring and direct drive positive contact opening features • Pull-on lock type for easy maintenance is also available. • Conforms to Class II of VDE Insulation Grade. ...
Page 2
Specifications ■ Characteristics Item Operating speed Operating frequency Contact resistance Insulation resistance Dielectric strength Between terminals 50/60 Hz, 1mm of same polarity (See note 2) Between terminals and ground Between terminals and non-current carrying metal parts Between terminals and actuator ...
Page 3
... D2D-1102 Note: Dimension is 36.7±0.1 with a panel Screw mount type Snap-fit panel mount switches use the panel cutout hole illustrated above. When mounting on a metal surface, be sure to provide a sep- arator between the switch and mounting plate. To turn OFF the power when the ...
Page 4
Safety Features Double Spring Mechanism Two return springs are provided for the pin plunger. Thus, if either of the springs are broken, this feature will prevent the switch from malfunctioning or short-circuiting. (Applicable to D2D-1000 and D2D-3000 models. The ...
Page 5
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions 2. The operating characteristics are for operation in the A direction( ) Panel Mounting D2D-1100 D2D-1101 D2D-1102 FP OP TTP ...
Page 6
... TTP Note: At pull-on lock operation. Precautions Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide, “Snap Action Switches, Technical Information” for correct use. ■ Correct Use Actuation Apply operation force to the pin plunger in the direction it operates. ...
Page 7
MEMO D2D Door Interlock Switch ...
Page 8
... All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B ...