PIC16F726-E/SO Microchip Technology, PIC16F726-E/SO Datasheet - Page 95

• Manufacturer Part Number: PIC16F726-E/SO
• Description: 14KB Flash Program, 1.8V-5.5V, 16MHz Internal Oscillator, 8b ADC, CCP, I2C/SPI,
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F726-E/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-SOIC (7.5mm Width)
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 3
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 11 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164112 - VOLTAGE LIMITER MPLAB ICD2 VPPICE2000 - EMULATOR MPLAB-ICE 2000 POD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

8.0
Device Configuration consists of Configuration Word 1
and Configuration Word 2 registers, Code Protection
and Device ID.
REGISTER 8-1:
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 13
bit 12
bit 11
bit 10
bit 9-8
bit 7
bit 6
bit 5
bit 4
bit 3
Note 1:
U-1
—
—
2:
3:
4:
(4)
DEVICE CONFIGURATION
Enabling Brown-out Reset does not automatically enable Power-up Timer.
The entire program memory will be erased when the code protection is turned off.
When MCLR is asserted in INTOSC or RC mode, the internal clock oscillator is disabled.
MPLAB
DEBUG: In-Circuit Debugger Mode bit
1 = In-Circuit Debugger disabled, RB6/ICSPCLK and RB7/ICSPDAT are general purpose I/O pins
0 = In-Circuit Debugger enabled, RB6/ICSPCLK and RB7/ICSPDAT are dedicated to the debugger
PLLEN: INTOSC PLL Enable bit
0 = INTOSC Frequency is 500 kHz
1 = INTOSC Frequency is 16 MHz (32x)
Unimplemented: Read as ‘1’
BORV: Brown-out Reset Voltage selection bit
0 = Brown-out Reset Voltage (V
1 = Brown-out Reset Voltage (V
BOREN<1:0>: Brown-out Reset Selection bits
0x = BOR disabled (Preconditioned State)
10 = BOR enabled during operation and disabled in Sleep
11 = BOR enabled
Unimplemented: Read as ‘1’
CP: Code Protection bit
1 = Program memory code protection is disabled
0 = Program memory code protection is enabled
MCLRE: RE3/MCLR pin function select bit
1 = RE3/MCLR pin function is MCLR
0 = RE3/MCLR pin function is digital input, MCLR internally tied to V
PWRTE: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
®
IDE masks unimplemented Configuration bits to ‘0’.
R/P-1
CP
—
CONFIG1: CONFIGURATION WORD REGISTER 1
P = Programmable bit
W = Writable bit
‘1’ = Bit is set
DEBUG
MCLRE
R/P-1
R/P-1
(2)
BOR
BOR
PWRTE
) set to 2.5 V nominal
) set to 1.9 V nominal
PLLEN
R/P-1
R/P-1
(3)
PIC16F72X/PIC16LF72X
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
WDTE
8.1
There are several Configuration Word bits that allow
different oscillator and memory protection options.
These are implemented as Configuration Word 1
register at 2007h and Configuration Word 2 register at
2008h. These registers are only accessible during
programming.
U-1
R/P-1
—
(4)
Configuration Words
DD
FOSC2
BORV
R/P-1
R/P-1
x = Bit is unknown
BOREN1
FOSC1
R/P-1
R/P-1
DS41341E-page 95
BOREN0
FOSC0
R/P-1
R/P-1
bit 8
bit 0