CS5535-UDCF AMD (ADVANCED MICRO DEVICES), CS5535-UDCF Datasheet - Page 375

no-image

CS5535-UDCF

Manufacturer Part Number
CS5535-UDCF
Description
Manufacturer
AMD (ADVANCED MICRO DEVICES)
Datasheet

Specifications of CS5535-UDCF

Operating Temperature (min)
0C
Operating Temperature (max)
85C
Operating Temperature Classification
Commercial
Mounting
Surface Mount
Lead Free Status / RoHS Status
Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CS5535-UDCF
Manufacturer:
AMD
Quantity:
20 000
System Management Bus Register Descriptions
6.11.1.5 SMB Address (SMB_ADDR)
SMB I/O Offset
Type
Reset Value
AMD Geode™ CS5535 Companion Device Data Book
Bit
Bit
6:0
0
7
SAEN
7
Name
START
Name
SAEN
SMBADDR
04h
R/W
00h
6
Description
Start. Set this bit only when in master mode or when requesting master mode.
0: Cleared after Start condition sent or Bus Error (BER (SMB I/O Offset 01h[5]) = 1)
1: Single or repeated Start condition generated on the SMB. If the device is not the
Description
Slave Enable.
0: SMB does not check for an address match with address field.
1: Address field holds a valid address and enables the match of ADDR to an incoming
Device address (SMB Own Address). These bits hold the 7-bit device address. When
in slave mode, the first 7 bits received after a Start condition are compared with this
field (first bit received is compared with bit 6, and the last bit with bit 0). If the address
field matches the received data and SAEN (bit 7) is 1, a match is declared.
detected.
active master of the bus (MASTER (SMB I/O Offset 01h[1]) = 0), setting START gen-
erates a Start condition when the SMB becomes free (BB (SMB I/O Offset 02h[1]) =
0). An address transmission sequence should then be performed.
If the device is the active master of the bus (MASTER = 1), setting START and then
writing to SMBSDA generates a Start condition. If a transmission is already in
progress, a repeated Start condition is generated. This condition can be used to
switch the direction of the data flow between the master and the slave, or to choose
another slave device without separating them with a Stop condition.
address byte.
5
SMB_CTRL1 Bit Descriptions
SMB_ADDR Bit Descriptions
SMB_ADDR Register Map
4
SMBADDR
3
2
31506B
1
0
375

Related parts for CS5535-UDCF