STM32F207VET6 STMicroelectronics, STM32F207VET6 Datasheet - Page 160

• Manufacturer Part Number: STM32F207VET6
• Description: MCU ARM 512KB FLASH 100LQFP
• Manufacturer: STMicroelectronics
• Series: STM32r

Specifications of STM32F207VET6

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 120MHz
• Connectivity: CAN, Ethernet, I²C, IrDA, LIN, MMC, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 82
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 132K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 16x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LFQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-11171

Revision history
160/163
Table 89.
22-Apr-2011
Date
Document revision history (continued)
Revision
6
Changed datasheet status to “Full Datasheet”.
Introduced concept of SRAM1 and SRAM2.
LQFP176 package now in production and offered only for 256 Kbyte
and 1 Mbyte devices.
Availability of WLCSP64+2 package limited to 512 Kbyte and 1 Mbyte
devices.
Updated
Compatible board design:
Added camera interface for STM32F207Vx devices in
STM32F205xx and STM32F207xx features and peripheral
Removed 16 MHz internal RC oscillator accuracy in
Clocks and
Updated
Modified I
startup,
Section 2.2.35: Audio PLL
Updated
backup registers
General-purpose timers
Modified maximum baud rate (oversampling by 16) for USART1 in
Table 4: USART feature
Updated note related to RFU pin below
LQFP100
STM32F20x LQFP176
ballout, and
Added PA15 and TT (3.6 V tolerant I/O) in
and ball
In
I2S3_CK to I2S2_SCK and I2S3_SCK, respectively.
Added RTC_50Hz as PB15 alternate function in
pin and ball definitions
Removed ETH _RMII_TX_CLK for PC3/AF11 in
function
Updated
characteristics.
T
Added CEXT, ESL, and ESR in
as well as
Modified
power supply
Updated
(regulator
power-down (regulator
Added OSC_OUT pin in
Figure 16: Pin input
Updated
REGOFF pins and modified notes.
Updated V
I
power control block
RUSH
STG
Table 5: STM32F20x pin and ball
Doc ID 15818 Rev 6
updated to –65 to +150 in
, added E
Section 2.2.29: Inter-integrated sound
definitions.
mapping.
Figure 1: Compatible board design: LQFP144
Section 2.2.17: Voltage
Section 2.2.18: Real-time clock (RTC), backup SRAM and
Table 7: Voltage characteristics
Note 4
Table 12: Operating conditions at power-up / power-down
Figure 17: Power supply scheme
2
pinout,
ON), and
Section 5.3.2: VCAP1/VCAP2 external
PVD
S sampling frequency range in
startup.
Table 5: STM32F20x pin and ball
range.
, V
RUSH
in
BOR1
and description of TIM2 and TIM5 in
Figure 11: STM32F20x LQFP144
Table 11: Limitations depending on the operating
characteristics.
Table 13: Operating conditions at power-up /
voltage.
and
, V
and
pinout,
OFF).
comparison.
(TIMx).
BOR2
Figure 15: Pin loading
Note 3
LQFP100.
(PLLI2S).
Table 6: Alternate function
, V
Changes
Figure 13: STM32F21xxx UFBGA176
Table 10: General operating conditions
Table 9: Thermal
BOR3
in
regulator.
Table 14: Embedded reset and
definitions, changed I2S2_CK and
STM32F205xx, STM32F207xx
, T
Figure 10: STM32F20x
RSTTEMPO
and
Section 2.2.13: Clocks and
Table 5: STM32F20x pin
to add IRROFF and
Table 6: Alternate
Table 8: Current
definitions.
(I2S), and
conditions. and
Table 5: STM32F20x
characteristics.
capacitor.
typical value, and
pinout,
Section 2.2.13:
Table 2:
Section :
mapping.
and
counts.
Figure 12:
Figure 2: