S-35390A-T8T1G Seiko Instruments, S-35390A-T8T1G Datasheet - Page 25

• Manufacturer Part Number: S-35390A-T8T1G
• Description: IC RTC I2C 2-WIRE 8-TSSOP
• Manufacturer: Seiko Instruments
• Type: Clock/Calendarr

Specifications of S-35390A-T8T1G

• Time Format: HH:MM:SS (12/24 hr)
• Date Format: YY-MM-DD-dd
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 1.3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-TSSOP
• Function: Clock/Calendar/Alarm/Battery Backup/Interrupt
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.3 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Rtc Bus Interface: Serial (2-Wire, I2C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 728-1007-2

Rev.3.0
Function to Clock-Correction
6. Operation of power-on detection circuit (only in the
The function to clock-correction is to correct advance/delay of the clock due to the deviation of oscillation frequency, in
order to make a high precise clock. For correction, the S-35390A adjusts the clock pulse by using a certain part of the
dividing circuit, not adjusting the frequency of the crystal oscillator. Correction is performed once every 20 seconds (or 60
seconds). The minimum resolution is approx. 3 ppm (or approx. 1 ppm) and the S-35390A corrects in the range of − 195.3
to +192.2 ppm (or of − 65.1 to +64.1 ppm).
clock-correction register. Regarding how to calculate the setting data, refer to “1. How to calculate” . When not using this
function, be sure to set “00h”.
• 32kE = 0, INT1AE = INT1ME = 0
Status register 2 setting
When power is applied to the S-35390A, the power-on detection operates to set “1” in the POC flag (B0 in the status
register 1). A 1 Hz clock pulse is output from the
INT1FE
INT1 pin
_00
Correction
Minimum resolution
Correction range
Figure 30 Output Timing of
Table 13 Function to Clock-Correction
− 195.3 to +192.2 ppm
Every 20 seconds
INT
3.052 ppm
Seiko Instruments Inc.
B0 = 0
1
(Refer to Table 13 .) Users can set up this function by using the
Pin during Operation of Power-on Detection Circuit
INT
1
0.5 s
pin.
0.5 s
INT
1
pin output mode)
− 65.1 to +64.1 ppm
Every 60 seconds
2-WIRE REAL-TIME CLOCK
Change by reset command
1.017 ppm
B0 = 1
OFF
S-35390A
25