MC3 Omron, MC3 Datasheet - Page 2

• Manufacturer Part Number: MC3
• Description: DIN Rail Mount Safety Mat Controller 24 VDC, With 2 - NO And 2 - NC Safety Contacts
• Manufacturer: Omron

Trims
Accessories
Note: For trims and accessories required for the Safety Mat system configuration, see "Installation" on page 4.
Appearance
Appearance
Ramp Trim with Yellow
PVC Cover
(1.22 m)
Ramp Trim with Yellow
PVC Cover
(2.44 m)
Joining Trim
(1.22 m)
Joining Trim
(2.44 m)
Aluminum Ramp Trim
(2.44 m)
Molded Outside Corner
Molded Inside Corner
Distribution Box
(for six mats)
Y Connector
Panel-mount Connector
Extension Cable (3 m)
Extension Cable (5 m)
Extension Cable (10 m)
Extension Cable (15 m)
Name
Name
(Available soon)
UMEC-03
UMEC-05
UMEC-10
UMEC-15
UM-Y-2-1
UMDB-6
UMPMC
UMRT4
UMRT8
UMJS4
UMJS8
UMOC
Model
UMAL
Model
UMIC
Installed on the perimeter of the Safety Mat.
Each Trim is composed of two parts, an alumi-
num base and a PVC Cover. Possible to install
cables inside.
The Joining Trims join the Safety Mats when
two or more Safety Mats are being combined.
In addition to joining the Safety Mats, the Join-
ing Trims preserve the Safety Mat's sensitivity
at the joints.
Installed on the perimeter of the Safety Mat.
Installed at the outside corners of the Safety
Mat combining with Ramp Trims with Yellow
PVC Cover.
Installed at the inside corners when two or
more Safety Mats combining with Ramp Trims
with Yellow PVC Cover are being combined.
Used to connect to two or more Safety Mats to
the single MC3 Safety Mat Controller.
Used to connect two Safety Mats to the single
MC3 Safety Mat Controller.
Distributes to individual lines to connect the
Safety Mat to a MC3 Safety Mat Controller.
This cable is used to extend a cable.
Remarks
Remarks
UM/MC3
2