MC3 Omron, MC3 Datasheet - Page 4

• Manufacturer Part Number: MC3
• Description: DIN Rail Mount Safety Mat Controller 24 VDC, With 2 - NO And 2 - NC Safety Contacts
• Manufacturer: Omron

Installation
Using Trim Pieces
Ramp Trim with Yellow PVC Cover: UMRT4/UMRT8
Secures the edges of the Safety Mats to the floor.
It is composed of two parts with an aluminum base and a PVC Cover.
Joining Trim: UMJS4/UMJS8
The Joining Trims join the Safety Mats when two or more Safety Mats
are being combined.
In addition to joining the Safety Mats, the Joining Trims preserve the
Safety Mat's sensitivity at the joints.
Aluminum Ramp Trim: UMAL
Secures the edges of the Safety Mat to the floor.
The Aluminum Ramp Trim is hollow, so cable can be routed through
it.
Molded Outside Corner: UMOC
Used together with the Ramp Trim with Yellow PVC Cover (UMRT4/
UMRT8) to secure the external corners of the Safety Mats to the floor.
Molded Inside Corner: UMIC
Used together with the Ramp Trim with Yellow PVC Cover (UMRT4/
UMRT8) to secure the internal corners of the Safety Mats to the floor.
Note: 1. The Aluminum Ramp Trim or Ramp Trim with Yellow PVC
Safety Mat Configuration
The Safety Mats are secured by anchoring the Ramp Trim with Yellow
PVC Cover and Molded Corner to the floor.
Before ordering, confirm the number of Ramp Trim with Yellow PVC
Cover and Molded Corner pieces that will be needed.
Example 1: Using a Single Safety Mat
In this case, the perimeter of the Safety Mat is about 4 m and the
following pieces are required:
The example above consists of the following components:
UMRT4
UMOC
UMOC
UMYM5-1000-1000 Safety Mat
UMRT4 Ramp Trim with Yellow PVC Cover (1.22 m) : 4 pieces
UMOC Molded Outside Corner
2. The Joining Trim must be cut to fit the size of the Safety
3. The Ramp Trim with Yellow PVC Cover and Molded Corner
Cover must be cut to fit the size of the Safety Mats being
used.
Furthermore, when the Safety Mat's wiring is being routed
through the Aluminum Ramp Trim or Ramp Trim with Yellow
PVC Cover, it will be necessary to cut or notch the
Aluminum Ramp Trim or Ramp Trim with Yellow PVC Cover
for cable access.
Refer to the Safety Mat Instruction Sheet for details on
cutting or notching the Aluminum Ramp Trim or Ramp Trim
with Yellow PVC Cover.
Mats being used.
must be anchored to the floor to secure the Safety Mats. It
is also necessary to drill holes in the Trim to anchor it.
Refer to the Safety Mat Instruction Sheet for details on
drilling holes in the Trim and Molded Corner and anchoring
it to the floor.
UMYM5-1000-1000
: 1 piece
: 4 pieces
Example 2: Using three Safety Mats
In this case, the perimeter of the Safety Mat is about 8 m, the joint
between the Safety Mats is 2-m long, and the following pieces are
required:
The example above consists of the following components:
UMYM5-1000-1000 Safety Mat
UMRT4 Ramp Trim with Yellow PVC Cover (1.22 m) : 8 pieces
UMJS4 Joining Trim (1.22 m)
UMOC Molded Outside Corner
UMIC Molded Inside Corner
UMYM5-1000-1000
UMIC
UMYM5-1000-1000
UMYM5-1000-1000
UM/MC3
: 3 pieces
: 2 pieces
: 5 pieces
: 1 piece
UMJS4
UMOC
UMRT4
UMOC
4